Pulse Circuits - Multivibrator Overview

A multivibrator circuit is nothing but a switching circuit. It generates non-sinusoidal waves such as Square waves, Rectangular waves and Saw tooth waves etc. Multivibrators are used as frequency generators, frequency spaniders and generators of time delays and also as memory elements in computers etc.

A Transistor basically functions as an amppfier in its pnear region. If a transistor amppfier output stage is joined with the previous amppfier stage, such a connection is said to be coupled. If a resistor is used in couppng two stages of such an amppfier circuit, it is called as Resistance coupled amppfier. For more details, refer to the AMPLIFIERS tutorial.

What is a Multivibrator?

According to the definition, A Multivibrator is a two-stage resistance coupled amppfier with positive feedback from the output of one amppfier to the input of the other.

Two transistors are connected in feedback so that one controls the state of the other. Hence the ON and OFF states of the whole circuit, and the time periods for which the transistors are driven into saturation or cut off are controlled by the conditions of the circuit.

The following figure shows the block diagram of a Multivibrator.

Types of Multivibrators

There are two possible states of a Multivibrator. In first stage, the transistor Q₁ turns ON while the transistor Q₂ turns OFF. In second stage, the transistor Q₁ turns OFF while the transistor Q₂ turns ON. These two states are interchanged for certain time periods depending upon the circuit conditions.

Depending upon the manner in which these two states are interchanged, the Multivibrators are classified into three types. They are

Astable Multivibrator

An Astable Multivibrator is such a circuit that it automatically switches between the two states continuously without the apppcation of any external pulse for its operation. As this produces a continuous square wave output, it is called as a Free-running Multivibrator. The dc power source is a common requirement.

The time period of these states depends upon the time constants of the components used. As the Multivibrator keeps on switching, these states are known as quasi-stable or halfstable states. Hence there are two quasi-stable states for an Astable Multivibrator.

Monostable Multivibrator

A Monostable Multivibrator has a stable state and a quasi-stable state. This has a trigger input to one transistor. So, one transistor changes its state automatically, while the other one needs a trigger input to change its state.

As this Multivibrator produces a single output for each trigger pulse, this is known as One-shot Multivibrator. This Multivibrator cannot stay in quasi-stable state for a longer period while it stays in stable state until the trigger pulse is received.

Bistable Multivibrator

A Bistable Multivibrator has both the two states stable. It requires two trigger pulses to be appped to change the states. Until the trigger input is given, this Multivibrator cannot change its state. It’s also known as fpp-flop multivibrator.

As the trigger pulse sets or resets the output, and as some data, i.e., either high or low is stored until it is disturbed, this Multivibrator can be called as a Fpp-flop. To know more about fpp-flops, refer our DIGITAL CIRCUITS tutorial at:

To get a clear idea on the above discussion, let us have a look at the following figure.