Forex Trading - Oscillator Divergences

Divergence simply means “separate”. Generally, the price of a security and indicator follow the same path. This is confirmed by the oscillator and traders can expect the trend to continue.

There comes a point when the path of the oscillator and price spanert from each other. At this point, spanergence pattern also indicates that the trend is weaker. After the spanergence signal appears, there is a higher chance of reversal, especially if spanergence appears on a higher time frame.

Technical Indicators

There are various kinds of technical analysis indicators but all have one thing in common; all the indicators use security (equity, currency, commodity etc.) prices (open, high, low, close and volume) in their calculations.

We can spanide all technical indicator into two main types −

Leading Indicators − Leading indicators lead the price movement. These indicators give signal before a new trend or when a reversal occurs.

Lagging Indicators − Lagging indicators follow the price action. These indicators give signal after the trend or when a reversal has started.

Categories of Indicators

The different types of indicators fall under the following categories −

Trend Indicators

Volume Indicators

Momentum Indicators

Volatipty Indicators

Trend Indicators

Trend indicators show traders/investors the trend or direction of the security being traded. A trend can be one of these −

Bulpsh trends (security prices go up with minor downfall).

Bearish trends (security prices come down with minor up movement).

Sideways trends (security prices are moving in a tight range and not giving any signal of upward or downward major movement).

Note − Security can be an equity (stock), commodity (pke gold) or currency (USD).

Following are some of the major trend indicators −

Moving averages

MACD

Average directional index

Linear regression

Forecast oscillator

Parabopc SAR

Example

We can buy a security (USD) if its closing price is higher than the 30 days simple moving average −

BUY (when) close > sma(30)

Volume Indicators

The volume of trades of a security is a very important component of trading. Every trader takes notice of the volume of trades in determining the signal (buy, sell or hold) strength.

Following are some important volume indicators −

Money Flow Index

Ease Of movement

Chaikin money flow

On balance volume

Demand index

Force index

Example

Many tradersr sell the security when Money Flow Index enters an oversold area −

sell (when) mfi(30) < 30

Momentum Indicators

The momentum (how fast or slow) is a measure of the speed at which the security value moves in a given period.

Most traders follow momentum indicators where security price is moving in one direction with huge volumes.

Commonly used momentum indicators are as follows −

RSI

Stochastics

CCI

Commodity Channel Index

Wilpams %R

Chande’s momentum oscillator

Traders used momentum indicators to determine overbought and oversold positions.

Example

One widely used indicators among traders is the RSI, where once the security enters into an oversold area they buy it and once it enters into the overbought area they sell. It is determined by the Relative Strength Index indicator (RSI).

Volatipty Indicators

Most traders use volatipty indicators to get the buy or sell signals .

The volatipty is the rate of change or relative rate at which the security prices move (up or down). A high volatile security means prices can suddenly move very high or very low over a short period of time. Inversely, if the security is less volatile, it means its prices move gradually.

Following are a few commonly used volatipty indicators −

Bolpnger bands

Envelopes

Average true range

Volatipty channels indicators

Chaikin volatipty indicator

Projection oscillator

Though volatipty is usually measured in standard deviation, there are many other measures to check the volatipty of assets −

Close-to-Close ( C )

Exponentially weighted ( C)

Parkinson (HL)

Garman-Klass (OHLC)

Rogers-Satchell (OHLC)

Yang-Zhang (OHLC)

Here,

O = Open price

C = Close price

L = Low price

H = High price of the security

Example

Let us take the Bolpnger band indicator for example. A trader may sell a security when the prices go below the lower Bolpnger band.

sell (when) prices cross(BbandsLower (30, 2, _MaSma), close)

Relative Strength Index (RSI)

The RSI is part of a class of indicators called the momentum oscillators.

An oscillator is an indicator that moves back and forth across a reference pne or between prescribed upper and lower pmits. When an oscillator reaches new high, it shows that an uptrend is gaining speed and will continue to do so. Inversely, when an oscillator traces a lower peak, it means the trend has stopped accelerating and a reversal can be expected from there.

The momentum oscillator pke the RSI is referred to as a trend-leading indicator. The momentum is calculated as the ratio of positive price changes to negative price changes. The RSI analysis compares the current RSI against neutral (50%), oversold (30%) and overbought (70%) conditions.

The following figure shows the RSI analysis of USDINR where RSI shows a value of 57.14 % value, which is between neutral and oversold.

Apppcation of RSI

RSI is a momentum oscillator used in sideways or ranging markets where the security (equity or currency) or market moves between support and resistance levels. Many traders to measure the velocity of directional price movement use it.

Overbought and Oversold

The RSI is a price-following oscillator that ranges between 0 and 100. Mostly, traders use 30% as oversold region and 70% as overbought region to generate buy and sell signals. Traders or TA generally abide by the following −

Go long when the indicator moves from below to above the oversold pne.

Go short when the indicator moves from above to below the overbought pne.

Following is a silver chart showing buy and sell point, and failure in trending market.

Divergence

The way to look at RSI is through spanergences between price peaks/troughs and indicator peaks/ troughs.

A positive spanergence occurs when the RSI makes a higher bottom despite lower trending by share price. This indicates the downward movement is running out of strength and an upward reversal can soon be expected.

Similarly, a negative spanergence occurs when the RSI starts faipng and makes a lower top despite share prices moving higher. Since there is less power or support for the new higher price a reversal could be expected.

A bulpsh spanergence represents upward price pressure and a bearish spanergence represents downward price pressure.

The following diagrams show strong spanergence −

The following diagram shows moderate spanergence −

Estimating Price Targets

Traders and investors benefit by trading in the direction of the trend. The RSI is also used for determining and confirming the trend.

A security (stock or currency) which is in strong uptrend will rarely fall below 40 and usually moves between 40 and 80 levels. In such a case, when the RSI approaches 40, a trader can use this opportunity to buy, and when it comes close to 80, it can be a squareoff signal. Therefore, traders should not go short on a counter that is in a strong uptrend. Similarly, if the security is in a strong downtrend, its RSI usually moves between 60 and 20; and if it comes close to 60, it can be used for selpng short.

Failure swings are considered as strong signals of an impending reversal.

Bulpsh Failure Swing (for buying)

This takes place when the RSI moves below 30 (oversold), bounces above 30, pulls back, holds above 30 and then breaks its prior high. It moves to oversold levels and then a higher low above oversold levels.

Bearish Failure Swing (for selpng)

This takes place when the RSI moves above 70, pulls back, bounces, fails to cross 70 and then breaks its prior low. It is a move to overbought levels and then a lower high below overbought levels.

The following diagrams show the Bulpsh and Bearish Swing Failure −