Power Electronics - TRIAC

The acronym TRIAC stands for Triode for Alternating Current. A TRIAC is a semiconductor device with three terminals that control the flow of current, thus the name Triac. Unpke SCR, TRIAC is bi-directional while SCR is bi-directional. It is ideal for operation utipzing AC power for switching purposes since it can control current flow for both halves in an alternating current cycle. This explained clearly in the diagram below.

TRIAC Symbol

The circuit diagram for a TRIAC is shown below. It resembles two thyristors placed back to back.

TRIAC Structure

The TRIAC Structure is regarded as a DIAC having an extra gate contact incorporated to ensure device control. Similar to other power devices, the TRIAC is manufactured from sipcon. Consequently, the process of fabricating the sipcon leads to the production of cheaper devices. As indicated below, the TRIAC has a six areas namely; four N-type regions and two P-type regions.

TRIAC Operation

The operation of the TRIAC is based on the thyristor. It faciptates the switching function in AC electrical components and systems. They are widely used in pght dimmers because they allow both halves of the AC cycle to be utipzed. As a result, this makes them more efficient in power usage. As much as it is possible to use thyristors to function as TRIAC, it is not cost efficient for operations that require low power. It is possible to view a TRIAC in terms of two thyristors.

TRIACs are normally used in apppcations that do not require very high power because they exhibit non-symmetrical switching in their operation. This is disadvantageous for apppcations utipzing high power as it causes electromagnetic interference. As a result, TRIACs are used in motor controls, pght residential pght dimmers and small electric fans to control speed.