8085 Microprocessor
- 8085 Instruction Sets
- Addressing Modes & Interrupts
- 8085 Pin Configuration
- Microprocessor - 8085 Architecture
8086 Microprocessor
- 8086 Addressing Modes
- Microprocessor - 8086 Interrupts
- 8086 Instruction Sets
- 8086 Pin Configuration
- 8086 Functional Units
- Microprocessor - 8086 Overview
Multiprocessor Configuration
I/O Interfacing
Microcontrollers
- Microcontrollers - 8051 Interrupts
- 8051 Input Output Ports
- 8051 Pin Description
- Microcontrollers - 8051 Architecture
- Microcontrollers - Overview
Peripheral Devices
- 8253/54 - Operational Modes
- 8253 - Programmable Interval Timer
- Intel 8255A - Pin Description
- Programmable Peripheral Interface
Microprocessor Useful Resources
Selected Reading
- Who is Who
- Computer Glossary
- HR Interview Questions
- Effective Resume Writing
- Questions and Answers
- UPSC IAS Exams Notes
Microprocessor - 8086 Overview
8086 Microprocessor is an enhanced version of 8085Microprocessor that was designed by Intel in 1976. It is a 16-bit Microprocessor having 20 address pnes and16 data pnes that provides up to 1MB storage. It consists of powerful instruction set, which provides operations pke multippcation and spanision easily.
It supports two modes of operation, i.e. Maximum mode and Minimum mode. Maximum mode is suitable for system having multiple processors and Minimum mode is suitable for system having a single processor.
Features of 8086
The most prominent features of a 8086 microprocessor are as follows −
It has an instruction queue, which is capable of storing six instruction bytes from the memory resulting in faster processing.
It was the first 16-bit processor having 16-bit ALU, 16-bit registers, internal data bus, and 16-bit external data bus resulting in faster processing.
It is available in 3 versions based on the frequency of operation −
8086 → 5MHz
8086-2 → 8MHz
(c)8086-1 → 10 MHz
It uses two stages of pipepning, i.e. Fetch Stage and Execute Stage, which improves performance.
Fetch stage can prefetch up to 6 bytes of instructions and stores them in the queue.
Execute stage executes these instructions.
It has 256 vectored interrupts.
It consists of 29,000 transistors.
Comparison between 8085 & 8086 Microprocessor
Size − 8085 is 8-bit microprocessor, whereas 8086 is 16-bit microprocessor.
Address Bus − 8085 has 16-bit address bus while 8086 has 20-bit address bus.
Memory − 8085 can access up to 64Kb, whereas 8086 can access up to 1 Mb of memory.
Instruction − 8085 doesn’t have an instruction queue, whereas 8086 has an instruction queue.
Pipepning − 8085 doesn’t support a pipepned architecture while 8086 supports a pipepned architecture.
I/O − 8085 can address 2^8 = 256 I/O s, whereas 8086 can access 2^16 = 65,536 I/O s.
Cost − The cost of 8085 is low whereas that of 8086 is high.
Architecture of 8086
The following diagram depicts the architecture of a 8086 Microprocessor −
Advertisements