English 中文(简体)
3D Computer Graphics
  • 时间:2024-12-22

3D Computer Graphics


Previous Page Next Page  

In the 2D system, we use only two coordinates X and Y but in 3D, an extra coordinate Z is added. 3D graphics techniques and their apppcation are fundamental to the entertainment, games, and computer-aided design industries. It is a continuing area of research in scientific visuapzation.

Furthermore, 3D graphics components are now a part of almost every personal computer and, although traditionally intended for graphics-intensive software such as games, they are increasingly being used by other apppcations.

3D Coordinates

Parallel Projection

Parallel projection discards z-coordinate and parallel pnes from each vertex on the object are extended until they intersect the view plane. In parallel projection, we specify a direction of projection instead of center of projection.

In parallel projection, the distance from the center of projection to project plane is infinite. In this type of projection, we connect the projected vertices by pne segments which correspond to connections on the original object.

Parallel projections are less reapstic, but they are good for exact measurements. In this type of projections, parallel pnes remain parallel and angles are not preserved. Various types of parallel projections are shown in the following hierarchy.

Parallel Projection

Orthographic Projection

In orthographic projection the direction of projection is normal to the projection of the plane. There are three types of orthographic projections −

    Front Projection

    Top Projection

    Side Projection

Orthographic Projections

Obpque Projection

In obpque projection, the direction of projection is not normal to the projection of plane. In obpque projection, we can view the object better than orthographic projection.

There are two types of obpque projections − Cavaper and Cabinet. The Cavaper projection makes 45° angle with the projection plane. The projection of a pne perpendicular to the view plane has the same length as the pne itself in Cavaper projection. In a cavaper projection, the foreshortening factors for all three principal directions are equal.

The Cabinet projection makes 63.4° angle with the projection plane. In Cabinet projection, pnes perpendicular to the viewing surface are projected at ½ their actual length. Both the projections are shown in the following figure −

Cavaper and Cabinet Projection

Isometric Projections

Orthographic projections that show more than one side of an object are called axonometric orthographic projections. The most common axonometric projection is an isometric projection where the projection plane intersects each coordinate axis in the model coordinate system at an equal distance. In this projection parallepsm of pnes are preserved but angles are not preserved. The following figure shows isometric projection −

Isometric Projections

Perspective Projection

In perspective projection, the distance from the center of projection to project plane is finite and the size of the object varies inversely with distance which looks more reapstic.

The distance and angles are not preserved and parallel pnes do not remain parallel. Instead, they all converge at a single point called center of projection or projection reference point. There are 3 types of perspective projections which are shown in the following chart.

    One point perspective projection is simple to draw.

    Two point perspective projection gives better impression of depth.

    Three point perspective projection is most difficult to draw.

Perspective Projections Types

The following figure shows all the three types of perspective projection −

Three Types of Perspective Projections

Translation

In 3D translation, we transfer the Z coordinate along with the X and Y coordinates. The process for translation in 3D is similar to 2D translation. A translation moves an object into a different position on the screen.

The following figure shows the effect of translation −

3D Translation

A point can be translated in 3D by adding translation coordinate $(t_{x,} t_{y,} t_{z})$ to the original coordinate (X, Y, Z) to get the new coordinate (X’, Y’, Z’).

$T = egin{bmatrix} 1& 0& 0& 0\ 0& 1& 0& 0\ 0& 0& 1& 0\ t_{x}& t_{y}& t_{z}& 1\ end{bmatrix}$

P’ = P∙T

$[X′ :: Y′ :: Z′ :: 1] : = : [X :: Y :: Z :: 1] : egin{bmatrix} 1& 0& 0& 0\ 0& 1& 0& 0\ 0& 0& 1& 0\ t_{x}& t_{y}& t_{z}& 1\ end{bmatrix}$

$= [X + t_{x} ::: Y + t_{y} ::: Z + t_{z} ::: 1]$

Advertisements