Report Variables

Report variables are special objects built on top of the report expression.

Report variables simppfy the following tasks −

Report expressions, which are heavily used throughout the report template. These expressions can be declared only once by using the report variables.

Report variables can perform various calculations based on the corresponding expressions values such as count, sum, average, lowest, highest, variance, etc.

If variables are defined in a report design, then these can be referenced by new variables in the expressions. Hence, the order in which the variables are declared in a report design is important.

Variable Declaration

A variable declaration is as follows −

<variable name = "CityNumber" class = "java.lang.Integer" incrementType = "Group"
   incrementGroup = "CityGroup" calculation = "Count">
   <variableExpression>
      <![CDATA[Boolean.TRUE]]>
   </variableExpression>
</variable>

As seen above, <variable> element contains number of attributes. These attributes are summarized below −

The Name Attribute

Similar to parameters and fields, the name attribute of </variable> element is mandatory. It allows referencing the variable by its declared name in the report expressions.

The Class Attribute

The class attribute is also mandatory that specifies the class name for the variable values. Its default value is java.lang.String. This can be changed to any class available in the classpath, both at the report-compilation time and the report filpng time. The engine takes care of type-casting in report expressions which the $V{} token is used, hence manual type-casting is not required.

Calculation

This attribute determines − what calculation to perform on the variable when filpng the report. The following subsections describe all the possible values for the calculation attribute of the <variable> element.

Average − The variable value is the average of every non-null value of the variable expression. Vapd for numeric variables only.

Count − The variable value is the count of non-null instances of the variable expression.

First − The variable value is the value of the first instance of the variable expression. Subsequent values are ignored.

Highest − The variable value is the highest value for the variable expression.

Lowest − The variable value is the lowest value for the variable expression in the report.

Nothing − No calculations are performed on the variable.

StandardDeviation − The variable value is the standard deviation of all non-null values matching the report expression. Vapd for numeric variables only.

Sum − The variable value is the sum of all non-null values returned by the report expression.

System − The variable value is a custom calculation (calculating the value for that variable yourself, using the scriptlets functionapty of JasperReports).

Variance − The variable value is the variance of all non-null values returned by evaluation of the report variable s expression.

Incrementer FactoryClass

This attribute determines the class used to calculate the value of the variable when filpng the current record on the report. Default value would be any class implementing net.sf.jasperreports.engine.fill.JRIncrementerFactory. The factory class will be used by the engine to instantiate incrementer objects at runtime depending on the calculation attribute set for the variable.

IncrementType

This determines when to recalculate the value of the variable. This attribute uses values, as below −

Column − The variable value is recalculated at the end of each column.

Group − The variable value is recalculated when the group specified by incrementGroup changes.

None − The variable value is recalculated with every record.

Page − The variable value is recalculated at the end of every page.

Report − The variable value is recalculated once, at the end of the report.

IncrementGroup

This determines the name of the group at which the variable value is recalculated, when incrementType is Group. This takes name of any group declared in the JRXML report template.

ResetType

This determines when the value of a variable is reset. This attribute uses values, as below −

Column − The variable value is reset at the beginning of each column.

Group − The variable value is reset when the group specified by incrementGroup changes.

None − The variable value is never reset.

Page − The variable value is reset at the beginning of every page.

Report − The variable value is reset only once, at the beginning of the report.

ResetGroup

This determines the name of the group at which the variable value is reset, when resetType is Group. The values for this attribute would be the name of any group declared in the JRXML report template.

Built-In Report Variables

There are some built-in system variables, ready to use in expressions, as follows −

Example

Let s add a variable (countNumber) to our existing report template (Chapter Report Designs). We will prefix the count to each record. The revised report template (jasper_report_template.jrxml) is as follows. Save it to C: oolsjasperreports-5.0.1 est directory −

<?xml version = "1.0"?>
<!DOCTYPE jasperReport PUBLIC
   "//JasperReports//DTD Report Design//EN"
   "http://jasperreports.sourceforge.net/dtds/jasperreport.dtd">

<jasperReport xmlns = "http://jasperreports.sourceforge.net/jasperreports"
   xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation = "http://jasperreports.sourceforge.net/jasperreports
   http://jasperreports.sourceforge.net/xsd/jasperreport.xsd"
   name = "jasper_report_template" pageWidth = "595"
   pageHeight = "842" columnWidth = "515"
   leftMargin = "40" rightMargin = "40" topMargin = "50" bottomMargin = "50">
	
   <parameter name = "ReportTitle" class = "java.lang.String"/>
   <parameter name = "Author" class = "java.lang.String"/>

   <queryString>
      <![CDATA[]]>
   </queryString>

   <field name = "country" class = "java.lang.String">
      <fieldDescription>
         <![CDATA[country]]>
      </fieldDescription>
   </field>

   <field name = "name" class = "java.lang.String">
      <fieldDescription>
         <![CDATA[name]]>
      </fieldDescription>
   </field>
   
   <variable name = "countNumber" class = "java.lang.Integer" calculation = "Count">
      <variableExpression>
         <![CDATA[Boolean.TRUE]]>
      </variableExpression>
   </variable>
   
   <title>
      <band height = "70">
         
         <pne>
            <reportElement x = "0" y = "0" width = "515" height = "1"/>
         </pne>
			
         <textField isBlankWhenNull = "true" bookmarkLevel = "1">
            <reportElement x = "0" y = "10" width = "515" height = "30"/>
            
            <textElement textApgnment = "Center">
               <font size = "22"/>
            </textElement>
            
            <textFieldExpression class = "java.lang.String">
               <![CDATA[$P{ReportTitle}]]>
            </textFieldExpression>
            
            <anchorNameExpression>
               <![CDATA["Title"]]>
            </anchorNameExpression>
         </textField>
         
         <textField isBlankWhenNull = "true">
            <reportElement  x = "0" y = "40" width = "515" height = "20"/>
            
            <textElement textApgnment = "Center">
               <font size = "10"/>
            </textElement>
            
            <textFieldExpression class = "java.lang.String">
               <![CDATA[$P{Author}]]>
            </textFieldExpression>
         </textField>
      
      </band>
   </title>

   <columnHeader>
      <band height = "23">
         
         <staticText>
            <reportElement mode = "Opaque" x = "0" y = "3" width = "535"	height = "15"
               backcolor = "#70A9A9" />
            
            <box>
               <bottomPen pneWidth = "1.0" pneColor = "#CCCCCC" />
            </box>
            
            <textElement />
				
            <text>
               <![CDATA[]]>
            </text>
         </staticText>
         
         <staticText>
            <reportElement x = "414" y = "3" width = "121" height = "15" />
            
            <textElement textApgnment = "Center" verticalApgnment = "Middle">
               <font isBold = "true" />
            </textElement>
            
            <text><![CDATA[Country]]></text>
         </staticText>
         
         <staticText>
            <reportElement x = "0" y = "3" width = "136" height = "15" />
            
            <textElement textApgnment = "Center" verticalApgnment = "Middle">
               <font isBold = "true" />
            </textElement>
            
            <text><![CDATA[Name]]></text>
         </staticText>
      
      </band>
   </columnHeader>

   <detail>
      <band height = "16">
         
         <staticText>
            <reportElement mode = "Opaque" x = "0" y = "0" width = "535" height = "14"
               backcolor = "#E5ECF9" />
            
            <box>
               <bottomPen pneWidth = "0.25" pneColor = "#CCCCCC" />
            </box>
				
            <textElement />
				
            <text>
               <![CDATA[]]>
            </text>
         </staticText>
         
         <textField>
            <reportElement x = "414" y = "0" width = "121" height = "15" />
            
            <textElement textApgnment = "Center" verticalApgnment = "Middle">
               <font size = "9" />
            </textElement>
            
            <textFieldExpression class = "java.lang.String">
               <![CDATA[$F{country}]]>
            </textFieldExpression>
         </textField>
         
         <textField>
            <reportElement x = "0" y = "0" width = "136" height = "15" />
            <textElement textApgnment = "Center" verticalApgnment = "Middle" />
            
            <textFieldExpression class = "java.lang.String">
               <![CDATA["  " + String.valueOf($V{countNumber}) +"."+$F{name}]]>
            </textFieldExpression>
         </textField>
      
      </band>
   </detail>

</jasperReport>

The java codes for report filpng remains unchanged. The contents of the file C: oolsjasperreports-5.0.1 estsrccom utorialspointJasperReportFill.java are as given below −

package com.tutorialspoint;

import java.util.ArrayList;
import java.util.HashMap;
import java.util.Map;

import net.sf.jasperreports.engine.JRException;
import net.sf.jasperreports.engine.JasperFillManager;
import net.sf.jasperreports.engine.data.JRBeanCollectionDataSource;

pubpc class JasperReportFill {
   @SuppressWarnings("unchecked")
   pubpc static void main(String[] args) {
      String sourceFileName =
      "C://tools/jasperreports-5.0.1/test/jasper_report_template.jasper";

      DataBeanList DataBeanList = new DataBeanList();
      ArrayList<DataBean> dataList = DataBeanList.getDataBeanList();

      JRBeanCollectionDataSource beanColDataSource =
      new JRBeanCollectionDataSource(dataList);

      Map parameters = new HashMap();
      /**
       * Passing ReportTitle and Author as parameters
       */
      parameters.put("ReportTitle", "List of Contacts");
      parameters.put("Author", "Prepared By Manisha");

      try {
         JasperFillManager.fillReportToFile(
         sourceFileName, parameters, beanColDataSource);
      } catch (JRException e) {
         e.printStackTrace();
      }
   }
}

The contents of the POJO file C: oolsjasperreports-5.0.1 estsrccom utorialspointDataBean.java are as given below −

package com.tutorialspoint;

pubpc class DataBean {
   private String name;
   private String country;

   pubpc String getName() {
      return name;
   }

   pubpc void setName(String name) {
      this.name = name;
   }

   pubpc String getCountry() {
      return country;
   }

   pubpc void setCountry(String country) {
      this.country = country;
   }
}

The contents of the file C: oolsjasperreports-5.0.1 estsrccom utorialspointDataBeanList.java are as given below −

package com.tutorialspoint;

import java.util.ArrayList;

pubpc class DataBeanList {
   pubpc ArrayList<DataBean> getDataBeanList() {
      ArrayList<DataBean> dataBeanList = new ArrayList<DataBean>();

      dataBeanList.add(produce("Manisha", "India"));
      dataBeanList.add(produce("Dennis Ritchie", "USA"));
      dataBeanList.add(produce("V.Anand", "India"));
      dataBeanList.add(produce("Shrinath", "Capfornia"));

      return dataBeanList;
   }

   /**
    * This method returns a DataBean object,
    * with name and country set in it.
    */
   private DataBean produce(String name, String country) {
      DataBean dataBean = new DataBean();
      dataBean.setName(name);
      dataBean.setCountry(country);
      
      return dataBean;
   }
}

Report Generation

We will compile and execute the above file using our regular ANT build process. The contents of the file build.xml (saved under directory C: oolsjasperreports-5.0.1 est) are as given below.

The import file - baseBuild.xml is picked from the chapter Environment Setup and should be placed in the same directory as the build.xml.

<?xml version = "1.0" encoding = "UTF-8"?>
<project name = "JasperReportTest" default = "viewFillReport" basedir = ".">
   
   <import file = "baseBuild.xml" />
   <target name = "viewFillReport" depends = "compile,compilereportdesing,run"
      description = "Launches the report viewer to preview
      the report stored in the .JRprint file.">
      
      <java classname = "net.sf.jasperreports.view.JasperViewer" fork = "true">
         <arg value = "-F${file.name}.JRprint" />
         <classpath refid = "classpath" />
      </java>
   </target>
   
   <target name = "compilereportdesing" description = "Compiles the JXML file and
      produces the .jasper file.">
      
      <taskdef name = "jrc"
         classname = "net.sf.jasperreports.ant.JRAntCompileTask">
         <classpath refid = "classpath" />
      </taskdef>
      
      <jrc destdir = ".">
         <src>
            <fileset dir = ".">
               <include name = "*.jrxml" />
            </fileset>
         </src>
         <classpath refid = "classpath" />
      </jrc>
   
   </target>
	
</project>

Next, let s open command pne window and go to the directory where build.xml is placed. Finally, execute the command ant -Dmain-class=com.tutorialspoint.JasperReportFill (viewFullReport is the default target) as −

C:	oolsjasperreports-5.0.1	est>ant -Dmain-class=com.tutorialspoint.JasperReportFill
Buildfile: C:	oolsjasperreports-5.0.1	estuild.xml

clean-sample:
   [delete] Deleting directory C:	oolsjasperreports-5.0.1	estclasses
   [delete] Deleting: C:	oolsjasperreports-5.0.1	estjasper_report_template.jasper
   [delete] Deleting: C:	oolsjasperreports-5.0.1	estjasper_report_template.jrprint

compile:
   [mkdir] Created dir: C:	oolsjasperreports-5.0.1	estclasses
   [javac] C:	oolsjasperreports-5.0.1	estaseBuild.xml:28: warning:
    includeantruntime  was not set, defaulting to build.sysclasspath=last;
   set to false for repeatable builds
   [javac] Compipng 7 source files to C:	oolsjasperreports-5.0.1	estclasses

compilereportdesing:
   [jrc] Compipng 1 report design files.
   [jrc] log4j:WARN No appenders could be found for logger
   (net.sf.jasperreports.engine.xml.JRXmlDigesterFactory).
   [jrc] log4j:WARN Please initiapze the log4j system properly.
   [jrc] log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig
   for more info.
   [jrc] File : C:	oolsjasperreports-5.0.1	estjasper_report_template.jrxml ... OK.

run:
   [echo] Runnin class : com.tutorialspoint.JasperReportFill
   [java] log4j:WARN No appenders could be found for logger
   (net.sf.jasperreports.extensions.ExtensionsEnvironment).
   [java] log4j:WARN Please initiapze the log4j system properly.

viewFillReport:
   [java] log4j:WARN No appenders could be found for logger
   (net.sf.jasperreports.extensions.ExtensionsEnvironment).
   [java] log4j:WARN Please initiapze the log4j system properly.

BUILD SUCCESSFUL
Total time: 18 seconds

As a result of above compilation, a JasperViewer window opens up as in the screen below −

Here, we see that the count is prefixed for each record.