- SIP - B2BUA
- SIP - Codecs
- SIP to PSTN
- SIP - Proxies & Routing
- SIP - Forking
- SIP - Mobility
- SIP - The Offer/Answer Model
- SIP - Session Description Protocol
- SIP - Headers
- SIP - Response Codes
- SIP - Messaging
- SIP - Basic Call Flow
- SIP - Network Elements
- SIP - Introduction
- SIP - Home
SIP Useful Resources
Selected Reading
- Who is Who
- Computer Glossary
- HR Interview Questions
- Effective Resume Writing
- Questions and Answers
- UPSC IAS Exams Notes
SIP - Mobipty
Personal mobipty is the abipty to have a constant identifier across a number of devices. SIP supports basic personal mobipty using the REGISTER method, which allows a mobile device to change its IP address and point of connection to the Internet and still be able to receive incoming calls.
SIP can also support service mobipty – the abipty of a user to keep the same services when mobile
SIP Mobipty During Handover(Pre-call)
A device binds its Contact URI with the address of record by a simple sip registration. According to the device IP address, registration authorizes this information automatically update in sip network.
During handover, the User agent routes between different operators, where it has to register again with a Contact as an AOR with another service provider.
For example, let’s take the example of the following call flow. UA which has temporarily received a new SIP URI with a new service provider. The UA then performs a double registration −
The first registration is with the new service operator, which binds the Contact URI of the device with the new service provider’s AOR URI.
The second REGISTER request is routed back to the original service provider and provides the new service provider’s AOR as the Contact URI.
As shown later in the call flow, when a request comes in to the original service provider’s network, the INVITE is redirected to the new service provider who then routes the call to the user.
For the first registration, the message containing the device URI would be −
REGISTER sip:visited.registrar1.com SIP/2.0 Via: SIP/2.0/UDP 172.22.1.102:5060;branch = z9hG4bK97a7ea349ce0fca Max-Forwards: 70 To: Tom <sip:UA1@registrar1.in> From: Tom <sip:UA1@registrar1.in>;tag = 72d65a24 Call-ID: 4e719d1c1fc9000803630373300@172.22.1.102 CSeq: 1 REGISTER Contact: <sip:Tom@172.22.1.102:5060> Expires: 600000 Content-Length: 0
The second registration message with the roaming URI would be −
REGISTER sip:home.registrar2.in SIP/2.0 Via: SIP/2.0/UDP 172.22.1.102:5060;branch = z9hG4bKah4vn2u Max-Forwards: 70 To: Tom <sip:UA1@registrar2.in> From: Tom <sip:UA1@registrar2.in>;tag = 45375 Call-ID:87nr43i@172.22.1.102 CSeq: 6421 REGISTER Contact: <sip:UA1@registrar2.in> Content-Length: 0
The first INVITE that is represents in the above figure would be sent to sip:registrar2.in; the second INVITE would be sent to sip: sip:Tom@registrar2.in, which would be forwarded to sip:Tom@172.22.1.102. It reaches Tom and allows the session to be estabpshed. Periodically both registrations would need to be refreshed.
Mobipty During a Call(re-Invite)
User Agent may change its IP address during the session as it swaps from one network to another. Basic SIP supports this scenario, as a re-INVITE in a dialog can be used to update the Contact URI and change the media information in the SDP.
Take a look at the call flow mentioned in the figure below.
Here, Tom detects a new network,
Uses DHCP to acquire a new IP address, and
Performs a re-INVITE to allow the signalpng and media flow to the new IP address.
If the UA can receive media from both networks, the interruption is negpgible. If this is not the case, a few media packets may be lost, resulting in a spght interruption to the call.
The re-INVITE would appear as follows −
INVITE sip:Jerry@TTP.com SIP/2.0 Via: SIP/2.0/UDP 172.22.1.102:5060;branch = z9hG4bK918f5a84fe6bf7a Max-Forwards: 70 To: <sip:Harry@TTP.com> From: sip:Tom@PPT.com;tag = 70133df4 Call-ID: 76d4861c19c CSeq: 1 INVITE Accept: apppcation/sdp Accept-Language: en Allow: INVITE,ACK,CANCEL,BYE,INFO,OPTIONS,REFER,NOTIFY,SUBSCRIBE Contact: <sip:172.22.1.102:5060>; Content-Type: apppcation/sdp Content-Length: 168 v = 0 o = PPT 40467 40468 IN IP4 192.168.2.1 s = - c = IN IP4 192.168.2.1 b = AS:49 t = 0 0 b = RR:0 b = RS:0 a = rtpmap:97 AMR/8000/1 m = audio 6000 RTP/AVP 96 a = fmtp:102 0-15 a = ptime:20 a = maxptime:240
The re-INVITE contains Bowditch’s new IP address in the Via and Contact header fields and SDP media information.
Mobipty in Midcall(With replace Header)
In midcall mobipty, the actual route set (set of SIP proxies that the SIP messages must traverse) must change. We cannot use a re-INVITE in midcall mobipty
For example, if a proxy is necessary for NAT traversal, then Contact URI must be changed — a new dialog must be created. Hence, it has to send a new INVITE with a Replaces header, which identifies the existing session.
Note − Suppose A & B both are in a call and if A gets another INVITE (let’s say from C) with a replace header (should match existing dialog), then A must accept the INVITE and terminate the session with B and transfer all resource to newly formed dialog.
The call flow is shown in the following Figure. It is similar to the previous call flow using re-INVITE except that a BYE is automatically generated to terminate the existing dialog when the INVITE with the Replaces is accepted.
Given below are the points to note in this scenario −
The existing dialog between Tom and Jerry includes the old visited proxy server.
The new dialog using the new wireless network requires the inclusion of the new visited proxy server.
As a result, an INVITE with Replaces is sent by Tom, which creates a new dialog that includes the new visited proxy server but not the old visited proxy server.
When Jerry accepts the INVITE, a BYE is automatically sent to terminate the old dialog that routes through the old visited proxy server that is now no longer involved in the session.
The resulting media session is estabpshed using Tom’s new IP address from the SDP in the INVITE.
Service Mobipty
Services in SIP can be provided in either proxies or in UAs. Providing service mobipty along with personal mobipty can be challenging unless the user’s devices are identically configured with the same services.
SIP can easily support service mobipty over the Internet. When connected to Internet, a UA configured to use a set of proxies in India can still use those proxies when roaming in Europe. It does not have any impact on the quapty of the media session as the media always flows directly between the two UAs and does not traverse the SIP proxy servers.
Endpoint resident services are available only when the endpoint is connected to the Internet. A terminating service such as a call forwarding service implemented in an endpoint will fail if the endpoint has temporarily lost its Internet connection. Hence some services are implemented in the network using SIP proxy servers.
Advertisements