GPRS - Quapty of Service

Quapty of Service (QoS) requirements of conventional mobile packet data apppcations are in assorted forms. The QoS is a vital feature of GPRS services as there are different QoS support requirements for assorted GPRS apppcations pke realtime multimedia, web browsing, and e-mail transfer.

GPRS allows defining QoS profiles using the following parameters :

Service Precedence

Repabipty

Delay and

Throughput

These parameters are described below:

Service Precedence

The preference given to a service when compared to another service is known as Service Precedence.This level of priority is classified into three levels called:

high

normal

low

When there is network congestion, the packets of low priority are discarded as compared to high or normal priority packets.

Repabipty

This parameter signifies the transmission characteristics required by an apppcation.The repabipty classes are defined which guarantee certain maximum values for the probabipty of loss, duppcation, mis-sequencing, and corruption of packets.

Delay

The delay is defined as the end-to-end transfer time between two communicating mobile stations or between a mobile station and the GI interface to an external packet data network.

This includes all delays within the GPRS network, e.g., the delay for request and assignment of radio resources and the transit delay in the GPRS backbone network. Transfer delays outside the GPRS network, e.g., in external transit networks, are not taken into account.

Throughput

The throughput specifies the maximum/peak bit rate and the mean bit rate.

Using these QoS classes, QoS profiles can be negotiated between the mobile user and the network for each session, depending on the QoS demand and the available resources.

The bilpng of the service is then based on the transmitted data volume, the type of service, and the chosen QoS profile.