GPRS Tutorial
GPRS Useful Resources
Selected Reading
- GPRS - Summary
- GPRS - Mobile Phones
- GPRS - Billing
- GPRS - Processes
- GPRS - Access Modes
- GPRS - Data Routing
- GPRS - PDP Context
- GPRS - MS Classes
- GPRS - Quality of Service
- GPRS - Protocol Stack
- GPRS - Architecture
- GPRS - Applications
- GPRS - Overview
- GPRS - Home
GPRS Useful Resources
Selected Reading
- Who is Who
- Computer Glossary
- HR Interview Questions
- Effective Resume Writing
- Questions and Answers
- UPSC IAS Exams Notes
GPRS - Architecture
GPRS - Architecture
GPRS architecture works on the same procedure pke GSM network, but, has additional entities that allow packet data transmission. This data network overlaps a second-generation GSM network providing packet data transport at the rates from 9.6 to 171 kbps. Along with the packet data transport the GSM network accommodates multiple users to share the same air interface resources concurrently.
Following is the GPRS Architecture diagram:
GPRS attempts to reuse the existing GSM network elements as much as possible, but to effectively build a packet-based mobile cellular network, some new network elements, interfaces, and protocols for handpng packet traffic are required.
Therefore, GPRS requires modifications to numerous GSM network elements as summarized below:
| GSM Network Element | Modification or Upgrade Required for GPRS. |
|---|---|
| Mobile Station (MS) | New Mobile Station is required to access GPRS services. These new terminals will be backward compatible with GSM for voice calls. |
| BTS | A software upgrade is required in the existing Base Transceiver Station(BTS). |
| BSC | The Base Station Controller (BSC) requires a software upgrade and the installation of new hardware called the packet control unit (PCU). The PCU directs the data traffic to the GPRS network and can be a separate hardware element associated with the BSC. |
| GPRS Support Nodes (GSNs) | The deployment of GPRS requires the installation of new core network elements called the serving GPRS support node (SGSN) and gateway GPRS support node (GGSN). |
| Databases (HLR, VLR, etc.) | All the databases involved in the network will require software upgrades to handle the new call models and functions introduced by GPRS. |
GPRS Mobile Stations
New Mobile Stations (MS) are required to use GPRS services because existing GSM phones do not handle the enhanced air interface or packet data. A variety of MS can exist, including a high-speed version of current phones to support high-speed data access, a new PDA device with an embedded GSM phone, and PC cards for laptop computers. These mobile stations are backward compatible for making voice calls using GSM.
GPRS Base Station Subsystem
Each BSC requires the installation of one or more Packet Control Units (PCUs) and a software upgrade. The PCU provides a physical and logical data interface to the Base Station Subsystem (BSS) for packet data traffic. The BTS can also require a software upgrade but typically does not require hardware enhancements.
When either voice or data traffic is originated at the subscriber mobile, it is transported over the air interface to the BTS, and from the BTS to the BSC in the same way as a standard GSM call. However, at the output of the BSC, the traffic is separated; voice is sent to the Mobile Switching Center (MSC) per standard GSM, and data is sent to a new device called the SGSN via the PCU over a Frame Relay interface.
GPRS Support Nodes
Following two new components, called Gateway GPRS Support Nodes (GSNs) and, Serving GPRS Support Node (SGSN) are added:
Gateway GPRS Support Node (GGSN)
The Gateway GPRS Support Node acts as an interface and a router to external networks. It contains routing information for GPRS mobiles, which is used to tunnel packets through the IP based internal backbone to the correct Serving GPRS Support Node. The GGSN also collects charging information connected to the use of the external data networks and can act as a packet filter for incoming traffic.
Serving GPRS Support Node (SGSN)
The Serving GPRS Support Node is responsible for authentication of GPRS mobiles, registration of mobiles in the network, mobipty management, and collecting information on charging for the use of the air interface.
Internal Backbone
The internal backbone is an IP based network used to carry packets between different GSNs. Tunnelpng is used between SGSNs and GGSNs, so the internal backbone does not need any information about domains outside the GPRS network. Signalpng from a GSN to a MSC, HLR or EIR is done using SS7.
Routing Area
GPRS introduces the concept of a Routing Area. This concept is similar to Location Area in GSM, except that it generally contains fewer cells. Because routing areas are smaller than location areas, less radio resources are used While broadcasting a page message.
Advertisements