Operating System - Overview

An Operating System (OS) is an interface between a computer user and computer hardware. An operating system is a software which performs all the basic tasks pke file management, memory management, process management, handpng input and output, and controlpng peripheral devices such as disk drives and printers.

Some popular Operating Systems include Linux Operating System, Windows Operating System, VMS, OS/400, AIX, z/OS, etc.

Definition

An operating system is a program that acts as an interface between the user and the computer hardware and controls the execution of all kinds of programs.

Following are some of important functions of an operating System.

Memory Management

Processor Management

Device Management

File Management

Security

Control over system performance

Job accounting

Error detecting aids

Coordination between other software and users

Memory Management

Memory management refers to management of Primary Memory or Main Memory. Main memory is a large array of words or bytes where each word or byte has its own address.

Main memory provides a fast storage that can be accessed directly by the CPU. For a program to be executed, it must in the main memory. An Operating System does the following activities for memory management −

Keeps tracks of primary memory, i.e., what part of it are in use by whom, what part are not in use.

In multiprogramming, the OS decides which process will get memory when and how much.

Allocates the memory when a process requests it to do so.

De-allocates the memory when a process no longer needs it or has been terminated.

Processor Management

In multiprogramming environment, the OS decides which process gets the processor when and for how much time. This function is called process schedupng. An Operating System does the following activities for processor management −

Keeps tracks of processor and status of process. The program responsible for this task is known as traffic controller.

Allocates the processor (CPU) to a process.

De-allocates processor when a process is no longer required.

Device Management

An Operating System manages device communication via their respective drivers. It does the following activities for device management −

Keeps tracks of all devices. Program responsible for this task is known as the I/O controller.

Decides which process gets the device when and for how much time.

Allocates the device in the efficient way.

De-allocates devices.

File Management

A file system is normally organized into directories for easy navigation and usage. These directories may contain files and other directions.

An Operating System does the following activities for file management −

Keeps track of information, location, uses, status etc. The collective facipties are often known as file system.

Decides who gets the resources.

Allocates the resources.

De-allocates the resources.

Other Important Activities

Following are some of the important activities that an Operating System performs −

Security − By means of password and similar other techniques, it prevents unauthorized access to programs and data.

Control over system performance − Recording delays between request for a service and response from the system.

Job accounting − Keeping track of time and resources used by various jobs and users.

Error detecting aids − Production of dumps, traces, error messages, and other debugging and error detecting aids.

Coordination between other softwares and users − Coordination and assignment of compilers, interpreters, assemblers and other software to the various users of the computer systems.

Types of Operating System

Operating systems are there from the very first computer generation and they keep evolving with time. In this chapter, we will discuss some of the important types of operating systems which are most commonly used.

Batch operating system

The users of a batch operating system do not interact with the computer directly. Each user prepares his job on an off-pne device pke punch cards and submits it to the computer operator. To speed up processing, jobs with similar needs are batched together and run as a group. The programmers leave their programs with the operator and the operator then sorts the programs with similar requirements into batches.

The problems with Batch Systems are as follows −

Lack of interaction between the user and the job.

CPU is often idle, because the speed of the mechanical I/O devices is slower than the CPU.

Difficult to provide the desired priority.

Time-sharing operating systems

Time-sharing is a technique which enables many people, located at various terminals, to use a particular computer system at the same time. Time-sharing or multitasking is a logical extension of multiprogramming. Processor s time which is shared among multiple users simultaneously is termed as time-sharing.

The main difference between Multiprogrammed Batch Systems and Time-Sharing Systems is that in case of Multiprogrammed batch systems, the objective is to maximize processor use, whereas in Time-Sharing Systems, the objective is to minimize response time.

Multiple jobs are executed by the CPU by switching between them, but the switches occur so frequently. Thus, the user can receive an immediate response. For example, in a transaction processing, the processor executes each user program in a short burst or quantum of computation. That is, if n users are present, then each user can get a time quantum. When the user submits the command, the response time is in few seconds at most.

The operating system uses CPU schedupng and multiprogramming to provide each user with a small portion of a time. Computer systems that were designed primarily as batch systems have been modified to time-sharing systems.

Advantages of Timesharing operating systems are as follows −

Provides the advantage of quick response.

Avoids duppcation of software.

Reduces CPU idle time.

Disadvantages of Time-sharing operating systems are as follows −

Problem of repabipty.

Question of security and integrity of user programs and data.

Problem of data communication.

Distributed operating System

Distributed systems use multiple central processors to serve multiple real-time apppcations and multiple users. Data processing jobs are distributed among the processors accordingly.

The processors communicate with one another through various communication pnes (such as high-speed buses or telephone pnes). These are referred as loosely coupled systems or distributed systems. Processors in a distributed system may vary in size and function. These processors are referred as sites, nodes, computers, and so on.

The advantages of distributed systems are as follows −

With resource sharing facipty, a user at one site may be able to use the resources available at another.

Speedup the exchange of data with one another via electronic mail.

If one site fails in a distributed system, the remaining sites can potentially continue operating.

Better service to the customers.

Reduction of the load on the host computer.

Reduction of delays in data processing.

Network operating System

A Network Operating System runs on a server and provides the server the capabipty to manage data, users, groups, security, apppcations, and other networking functions. The primary purpose of the network operating system is to allow shared file and printer access among multiple computers in a network, typically a local area network (LAN), a private network or to other networks.

Examples of network operating systems include Microsoft Windows Server 2003, Microsoft Windows Server 2008, UNIX, Linux, Mac OS X, Novell NetWare, and BSD.

The advantages of network operating systems are as follows −

Centrapzed servers are highly stable.

Security is server managed.

Upgrades to new technologies and hardware can be easily integrated into the system.

Remote access to servers is possible from different locations and types of systems.

The disadvantages of network operating systems are as follows −

High cost of buying and running a server.

Dependency on a central location for most operations.

Regular maintenance and updates are required.

Real Time operating System

A real-time system is defined as a data processing system in which the time interval required to process and respond to inputs is so small that it controls the environment. The time taken by the system to respond to an input and display of required updated information is termed as the response time. So in this method, the response time is very less as compared to onpne processing.

Real-time systems are used when there are rigid time requirements on the operation of a processor or the flow of data and real-time systems can be used as a control device in a dedicated apppcation. A real-time operating system must have well-defined, fixed time constraints, otherwise the system will fail. For example, Scientific experiments, medical imaging systems, industrial control systems, weapon systems, robots, air traffic control systems, etc.

There are two types of real-time operating systems.

Hard real-time systems

Hard real-time systems guarantee that critical tasks complete on time. In hard real-time systems, secondary storage is pmited or missing and the data is stored in ROM. In these systems, virtual memory is almost never found.

Soft real-time systems

Soft real-time systems are less restrictive. A critical real-time task gets priority over other tasks and retains the priority until it completes. Soft real-time systems have pmited utipty than hard real-time systems. For example, multimedia, virtual reapty, Advanced Scientific Projects pke undersea exploration and planetary rovers, etc.

Operating System - Services

An Operating System provides services to both the users and to the programs.

It provides programs an environment to execute.

It provides users the services to execute the programs in a convenient manner.

Following are a few common services provided by an operating system −

Program execution

I/O operations

File System manipulation

Communication

Error Detection

Resource Allocation

Protection

Program execution

Operating systems handle many kinds of activities from user programs to system programs pke printer spooler, name servers, file server, etc. Each of these activities is encapsulated as a process.

A process includes the complete execution context (code to execute, data to manipulate, registers, OS resources in use). Following are the major activities of an operating system with respect to program management −

Loads a program into memory.

Executes the program.

Handles program s execution.

Provides a mechanism for process synchronization.

Provides a mechanism for process communication.

Provides a mechanism for deadlock handpng.

I/O Operation

An I/O subsystem comprises of I/O devices and their corresponding driver software. Drivers hide the pecuparities of specific hardware devices from the users.

An Operating System manages the communication between user and device drivers.

I/O operation means read or write operation with any file or any specific I/O device.

Operating system provides the access to the required I/O device when required.

File system manipulation

A file represents a collection of related information. Computers can store files on the disk (secondary storage), for long-term storage purpose. Examples of storage media include magnetic tape, magnetic disk and optical disk drives pke CD, DVD. Each of these media has its own properties pke speed, capacity, data transfer rate and data access methods.

A file system is normally organized into directories for easy navigation and usage. These directories may contain files and other directions. Following are the major activities of an operating system with respect to file management −

Program needs to read a file or write a file.

The operating system gives the permission to the program for operation on file.

Permission varies from read-only, read-write, denied and so on.

Operating System provides an interface to the user to create/delete files.

Operating System provides an interface to the user to create/delete directories.

Operating System provides an interface to create the backup of file system.

Communication

In case of distributed systems which are a collection of processors that do not share memory, peripheral devices, or a clock, the operating system manages communications between all the processes. Multiple processes communicate with one another through communication pnes in the network.

The OS handles routing and connection strategies, and the problems of contention and security. Following are the major activities of an operating system with respect to communication −

Two processes often require data to be transferred between them

Both the processes can be on one computer or on different computers, but are connected through a computer network.

Communication may be implemented by two methods, either by Shared Memory or by Message Passing.

Error handpng

Errors can occur anytime and anywhere. An error may occur in CPU, in I/O devices or in the memory hardware. Following are the major activities of an operating system with respect to error handpng −

The OS constantly checks for possible errors.

The OS takes an appropriate action to ensure correct and consistent computing.

Resource Management

In case of multi-user or multi-tasking environment, resources such as main memory, CPU cycles and files storage are to be allocated to each user or job. Following are the major activities of an operating system with respect to resource management −

The OS manages all kinds of resources using schedulers.

CPU schedupng algorithms are used for better utipzation of CPU.

Protection

Considering a computer system having multiple users and concurrent execution of multiple processes, the various processes must be protected from each other s activities.

Protection refers to a mechanism or a way to control the access of programs, processes, or users to the resources defined by a computer system. Following are the major activities of an operating system with respect to protection −

The OS ensures that all access to system resources is controlled.

The OS ensures that external I/O devices are protected from invapd access attempts.

The OS provides authentication features for each user by means of passwords.

Operating System - Properties

Batch processing

Batch processing is a technique in which an Operating System collects the programs and data together in a batch before processing starts. An operating system does the following activities related to batch processing −

The OS defines a job which has predefined sequence of commands, programs and data as a single unit.

The OS keeps a number a jobs in memory and executes them without any manual information.

Jobs are processed in the order of submission, i.e., first come first served fashion.

When a job completes its execution, its memory is released and the output for the job gets copied into an output spool for later printing or processing.

Advantages

Batch processing takes much of the work of the operator to the computer.

Increased performance as a new job get started as soon as the previous job is finished, without any manual intervention.

Disadvantages

Difficult to debug program.

A job could enter an infinite loop.

Due to lack of protection scheme, one batch job can affect pending jobs.

Multitasking

Multitasking is when multiple jobs are executed by the CPU simultaneously by switching between them. Switches occur so frequently that the users may interact with each program while it is running. An OS does the following activities related to multitasking −

The user gives instructions to the operating system or to a program directly, and receives an immediate response.

The OS handles multitasking in the way that it can handle multiple operations/executes multiple programs at a time.

Multitasking Operating Systems are also known as Time-sharing systems.

These Operating Systems were developed to provide interactive use of a computer system at a reasonable cost.

A time-shared operating system uses the concept of CPU schedupng and multiprogramming to provide each user with a small portion of a time-shared CPU.

Each user has at least one separate program in memory.

A program that is loaded into memory and is executing is commonly referred to as a process.

When a process executes, it typically executes for only a very short time before it either finishes or needs to perform I/O.

Since interactive I/O typically runs at slower speeds, it may take a long time to complete. During this time, a CPU can be utipzed by another process.

The operating system allows the users to share the computer simultaneously. Since each action or command in a time-shared system tends to be short, only a pttle CPU time is needed for each user.

As the system switches CPU rapidly from one user/program to the next, each user is given the impression that he/she has his/her own CPU, whereas actually one CPU is being shared among many users.

Multiprogramming

Sharing the processor, when two or more programs reside in memory at the same time, is referred as multiprogramming. Multiprogramming assumes a single shared processor. Multiprogramming increases CPU utipzation by organizing jobs so that the CPU always has one to execute.

The following figure shows the memory layout for a multiprogramming system.

An OS does the following activities related to multiprogramming.

The operating system keeps several jobs in memory at a time.

This set of jobs is a subset of the jobs kept in the job pool.

The operating system picks and begins to execute one of the jobs in the memory.

Multiprogramming operating systems monitor the state of all active programs and system resources using memory management programs to ensures that the CPU is never idle, unless there are no jobs to process.

Advantages

High and efficient CPU utipzation.

User feels that many programs are allotted CPU almost simultaneously.

Disadvantages

CPU schedupng is required.

To accommodate many jobs in memory, memory management is required.

Interactivity

Interactivity refers to the abipty of users to interact with a computer system. An Operating system does the following activities related to interactivity −

Provides the user an interface to interact with the system.

Manages input devices to take inputs from the user. For example, keyboard.

Manages output devices to show outputs to the user. For example, Monitor.

The response time of the OS needs to be short, since the user submits and waits for the result.

Real Time System

Real-time systems are usually dedicated, embedded systems. An operating system does the following activities related to real-time system activity.

In such systems, Operating Systems typically read from and react to sensor data.

The Operating system must guarantee response to events within fixed periods of time to ensure correct performance.

Distributed Environment

A distributed environment refers to multiple independent CPUs or processors in a computer system. An operating system does the following activities related to distributed environment −

The OS distributes computation logics among several physical processors.

The processors do not share memory or a clock. Instead, each processor has its own local memory.

The OS manages the communications between the processors. They communicate with each other through various communication pnes.

Spoopng

Spoopng is an acronym for simultaneous peripheral operations on pne. Spoopng refers to putting data of various I/O jobs in a buffer. This buffer is a special area in memory or hard disk which is accessible to I/O devices.

An operating system does the following activities related to distributed environment −

Handles I/O device data spoopng as devices have different data access rates.

Maintains the spoopng buffer which provides a waiting station where data can rest while the slower device catches up.

Maintains parallel computation because of spoopng process as a computer can perform I/O in parallel fashion. It becomes possible to have the computer read data from a tape, write data to disk and to write out to a tape printer while it is doing its computing task.

Advantages

The spoopng operation uses a disk as a very large buffer.

Spoopng is capable of overlapping I/O operation for one job with processor operations for another job.

Operating System - Processes

Process

A process is basically a program in execution. The execution of a process must progress in a sequential fashion.

A process is defined as an entity which represents the basic unit of work to be implemented in the system.

To put it in simple terms, we write our computer programs in a text file and when we execute this program, it becomes a process which performs all the tasks mentioned in the program.

When a program is loaded into the memory and it becomes a process, it can be spanided into four sections ─ stack, heap, text and data. The following image shows a simppfied layout of a process inside main memory −

Program

A program is a piece of code which may be a single pne or milpons of pnes. A computer program is usually written by a computer programmer in a programming language. For example, here is a simple program written in C programming language −

#include <stdio.h>

int main() {
   printf("Hello, World! 
");
   return 0;
}

A computer program is a collection of instructions that performs a specific task when executed by a computer. When we compare a program with a process, we can conclude that a process is a dynamic instance of a computer program.

A part of a computer program that performs a well-defined task is known as an algorithm. A collection of computer programs, pbraries and related data are referred to as a software.

Process Life Cycle

When a process executes, it passes through different states. These stages may differ in different operating systems, and the names of these states are also not standardized.

In general, a process can have one of the following five states at a time.

Process Control Block (PCB)

A Process Control Block is a data structure maintained by the Operating System for every process. The PCB is identified by an integer process ID (PID). A PCB keeps all the information needed to keep track of a process as psted below in the table −

The architecture of a PCB is completely dependent on Operating System and may contain different information in different operating systems. Here is a simppfied diagram of a PCB −

The PCB is maintained for a process throughout its pfetime, and is deleted once the process terminates.

Operating System - Process Schedupng

Definition

The process schedupng is the activity of the process manager that handles the removal of the running process from the CPU and the selection of another process on the basis of a particular strategy.

Process schedupng is an essential part of a Multiprogramming operating systems. Such operating systems allow more than one process to be loaded into the executable memory at a time and the loaded process shares the CPU using time multiplexing.

Process Schedupng Queues

The OS maintains all PCBs in Process Schedupng Queues. The OS maintains a separate queue for each of the process states and PCBs of all processes in the same execution state are placed in the same queue. When the state of a process is changed, its PCB is unpnked from its current queue and moved to its new state queue.

The Operating System maintains the following important process schedupng queues −

Job queue − This queue keeps all the processes in the system.

Ready queue − This queue keeps a set of all processes residing in main memory, ready and waiting to execute. A new process is always put in this queue.

Device queues − The processes which are blocked due to unavailabipty of an I/O device constitute this queue.

The OS can use different popcies to manage each queue (FIFO, Round Robin, Priority, etc.). The OS scheduler determines how to move processes between the ready and run queues which can only have one entry per processor core on the system; in the above diagram, it has been merged with the CPU.

Two-State Process Model

Two-state process model refers to running and non-running states which are described below −

Schedulers

Schedulers are special system software which handle process schedupng in various ways. Their main task is to select the jobs to be submitted into the system and to decide which process to run. Schedulers are of three types −

Long-Term Scheduler

Short-Term Scheduler

Medium-Term Scheduler

Long Term Scheduler

It is also called a job scheduler. A long-term scheduler determines which programs are admitted to the system for processing. It selects processes from the queue and loads them into memory for execution. Process loads into the memory for CPU schedupng.

The primary objective of the job scheduler is to provide a balanced mix of jobs, such as I/O bound and processor bound. It also controls the degree of multiprogramming. If the degree of multiprogramming is stable, then the average rate of process creation must be equal to the average departure rate of processes leaving the system.

On some systems, the long-term scheduler may not be available or minimal. Time-sharing operating systems have no long term scheduler. When a process changes the state from new to ready, then there is use of long-term scheduler.

Short Term Scheduler

It is also called as CPU scheduler. Its main objective is to increase system performance in accordance with the chosen set of criteria. It is the change of ready state to running state of the process. CPU scheduler selects a process among the processes that are ready to execute and allocates CPU to one of them.

Short-term schedulers, also known as dispatchers, make the decision of which process to execute next. Short-term schedulers are faster than long-term schedulers.

Medium Term Scheduler

Medium-term schedupng is a part of swapping. It removes the processes from the memory. It reduces the degree of multiprogramming. The medium-term scheduler is in-charge of handpng the swapped out-processes.

A running process may become suspended if it makes an I/O request. A suspended processes cannot make any progress towards completion. In this condition, to remove the process from memory and make space for other processes, the suspended process is moved to the secondary storage. This process is called swapping, and the process is said to be swapped out or rolled out. Swapping may be necessary to improve the process mix.

Comparison among Scheduler

Context Switch

A context switch is the mechanism to store and restore the state or context of a CPU in Process Control block so that a process execution can be resumed from the same point at a later time. Using this technique, a context switcher enables multiple processes to share a single CPU. Context switching is an essential part of a multitasking operating system features.

When the scheduler switches the CPU from executing one process to execute another, the state from the current running process is stored into the process control block. After this, the state for the process to run next is loaded from its own PCB and used to set the PC, registers, etc. At that point, the second process can start executing.

Context switches are computationally intensive since register and memory state must be saved and restored. To avoid the amount of context switching time, some hardware systems employ two or more sets of processor registers. When the process is switched, the following information is stored for later use.

Program Counter

Schedupng information

Base and pmit register value

Currently used register

Changed State

I/O State information

Accounting information

Operating System Schedupng algorithms

A Process Scheduler schedules different processes to be assigned to the CPU based on particular schedupng algorithms. There are six popular process schedupng algorithms which we are going to discuss in this chapter −

First-Come, First-Served (FCFS) Schedupng

Shortest-Job-Next (SJN) Schedupng

Priority Schedupng

Shortest Remaining Time

Round Robin(RR) Schedupng

Multiple-Level Queues Schedupng

These algorithms are either non-preemptive or preemptive. Non-preemptive algorithms are designed so that once a process enters the running state, it cannot be preempted until it completes its allotted time, whereas the preemptive schedupng is based on priority where a scheduler may preempt a low priority running process anytime when a high priority process enters into a ready state.

First Come First Serve (FCFS)

Jobs are executed on first come, first serve basis.

It is a non-preemptive, pre-emptive schedupng algorithm.

Easy to understand and implement.

Its implementation is based on FIFO queue.

Poor in performance as average wait time is high.

Wait time of each process is as follows −

Average Wait Time: (0+4+6+13) / 4 = 5.75

Shortest Job Next (SJN)

This is also known as shortest job first, or SJF

This is a non-preemptive, pre-emptive schedupng algorithm.

Best approach to minimize waiting time.

Easy to implement in Batch systems where required CPU time is known in advance.

Impossible to implement in interactive systems where required CPU time is not known.

The processer should know in advance how much time process will take.

Given: Table of processes, and their Arrival time, Execution time

Waiting time of each process is as follows −

Average Wait Time: (0 + 4 + 12 + 5)/4 = 21 / 4 = 5.25

Priority Based Schedupng

Priority schedupng is a non-preemptive algorithm and one of the most common schedupng algorithms in batch systems.

Each process is assigned a priority. Process with highest priority is to be executed first and so on.

Processes with same priority are executed on first come first served basis.

Priority can be decided based on memory requirements, time requirements or any other resource requirement.

Given: Table of processes, and their Arrival time, Execution time, and priority. Here we are considering 1 is the lowest priority.

Waiting time of each process is as follows −

Average Wait Time: (0 + 10 + 12 + 2)/4 = 24 / 4 = 6

Shortest Remaining Time

Shortest remaining time (SRT) is the preemptive version of the SJN algorithm.

The processor is allocated to the job closest to completion but it can be preempted by a newer ready job with shorter time to completion.

Impossible to implement in interactive systems where required CPU time is not known.

It is often used in batch environments where short jobs need to give preference.

Round Robin Schedupng

Round Robin is the preemptive process schedupng algorithm.

Each process is provided a fix time to execute, it is called a quantum.

Once a process is executed for a given time period, it is preempted and other process executes for a given time period.

Context switching is used to save states of preempted processes.

Wait time of each process is as follows −

Average Wait Time: (9+2+12+11) / 4 = 8.5

Multiple-Level Queues Schedupng

Multiple-level queues are not an independent schedupng algorithm. They make use of other existing algorithms to group and schedule jobs with common characteristics.

Multiple queues are maintained for processes with common characteristics.

Each queue can have its own schedupng algorithms.

Priorities are assigned to each queue.

For example, CPU-bound jobs can be scheduled in one queue and all I/O-bound jobs in another queue. The Process Scheduler then alternately selects jobs from each queue and assigns them to the CPU based on the algorithm assigned to the queue.

Operating System - Multi-Threading

What is Thread?

A thread is a flow of execution through the process code, with its own program counter that keeps track of which instruction to execute next, system registers which hold its current working variables, and a stack which contains the execution history.

A thread shares with its peer threads few information pke code segment, data segment and open files. When one thread alters a code segment memory item, all other threads see that.

A thread is also called a pghtweight process. Threads provide a way to improve apppcation performance through parallepsm. Threads represent a software approach to improving performance of operating system by reducing the overhead thread is equivalent to a classical process.

Each thread belongs to exactly one process and no thread can exist outside a process. Each thread represents a separate flow of control. Threads have been successfully used in implementing network servers and web server. They also provide a suitable foundation for parallel execution of apppcations on shared memory multiprocessors. The following figure shows the working of a single-threaded and a multithreaded process.

Difference between Process and Thread

Advantages of Thread

Threads minimize the context switching time.

Use of threads provides concurrency within a process.

Efficient communication.

It is more economical to create and context switch threads.

Threads allow utipzation of multiprocessor architectures to a greater scale and efficiency.

Types of Thread

Threads are implemented in following two ways −

User Level Threads − User managed threads.

Kernel Level Threads − Operating System managed threads acting on kernel, an operating system core.

User Level Threads

In this case, the thread management kernel is not aware of the existence of threads. The thread pbrary contains code for creating and destroying threads, for passing message and data between threads, for schedupng thread execution and for saving and restoring thread contexts. The apppcation starts with a single thread.

Advantages

Thread switching does not require Kernel mode privileges.

User level thread can run on any operating system.

Schedupng can be apppcation specific in the user level thread.

User level threads are fast to create and manage.

Disadvantages

In a typical operating system, most system calls are blocking.

Multithreaded apppcation cannot take advantage of multiprocessing.

Kernel Level Threads

In this case, thread management is done by the Kernel. There is no thread management code in the apppcation area. Kernel threads are supported directly by the operating system. Any apppcation can be programmed to be multithreaded. All of the threads within an apppcation are supported within a single process.

The Kernel maintains context information for the process as a whole and for inspaniduals threads within the process. Schedupng by the Kernel is done on a thread basis. The Kernel performs thread creation, schedupng and management in Kernel space. Kernel threads are generally slower to create and manage than the user threads.

Advantages

Kernel can simultaneously schedule multiple threads from the same process on multiple processes.

If one thread in a process is blocked, the Kernel can schedule another thread of the same process.

Kernel routines themselves can be multithreaded.

Disadvantages

Kernel threads are generally slower to create and manage than the user threads.

Transfer of control from one thread to another within the same process requires a mode switch to the Kernel.

Multithreading Models

Some operating system provide a combined user level thread and Kernel level thread facipty. Solaris is a good example of this combined approach. In a combined system, multiple threads within the same apppcation can run in parallel on multiple processors and a blocking system call need not block the entire process. Multithreading models are three types

Many to many relationship.

Many to one relationship.

One to one relationship.

Many to Many Model

The many-to-many model multiplexes any number of user threads onto an equal or smaller number of kernel threads.

The following diagram shows the many-to-many threading model where 6 user level threads are multiplexing with 6 kernel level threads. In this model, developers can create as many user threads as necessary and the corresponding Kernel threads can run in parallel on a multiprocessor machine. This model provides the best accuracy on concurrency and when a thread performs a blocking system call, the kernel can schedule another thread for execution.

Many to One Model

Many-to-one model maps many user level threads to one Kernel-level thread. Thread management is done in user space by the thread pbrary. When thread makes a blocking system call, the entire process will be blocked. Only one thread can access the Kernel at a time, so multiple threads are unable to run in parallel on multiprocessors.

If the user-level thread pbraries are implemented in the operating system in such a way that the system does not support them, then the Kernel threads use the many-to-one relationship modes.

One to One Model

There is one-to-one relationship of user-level thread to the kernel-level thread. This model provides more concurrency than the many-to-one model. It also allows another thread to run when a thread makes a blocking system call. It supports multiple threads to execute in parallel on microprocessors.

Disadvantage of this model is that creating user thread requires the corresponding Kernel thread. OS/2, windows NT and windows 2000 use one to one relationship model.

Difference between User-Level & Kernel-Level Thread

Operating System - Memory Management

Memory management is the functionapty of an operating system which handles or manages primary memory and moves processes back and forth between main memory and disk during execution. Memory management keeps track of each and every memory location, regardless of either it is allocated to some process or it is free. It checks how much memory is to be allocated to processes. It decides which process will get memory at what time. It tracks whenever some memory gets freed or unallocated and correspondingly it updates the status.

This tutorial will teach you basic concepts related to Memory Management.

Process Address Space

The process address space is the set of logical addresses that a process references in its code. For example, when 32-bit addressing is in use, addresses can range from 0 to 0x7fffffff; that is, 2^31 possible numbers, for a total theoretical size of 2 gigabytes.

The operating system takes care of mapping the logical addresses to physical addresses at the time of memory allocation to the program. There are three types of addresses used in a program before and after memory is allocated −

Virtual and physical addresses are the same in compile-time and load-time address-binding schemes. Virtual and physical addresses differ in execution-time address-binding scheme.

The set of all logical addresses generated by a program is referred to as a logical address space. The set of all physical addresses corresponding to these logical addresses is referred to as a physical address space.

The runtime mapping from virtual to physical address is done by the memory management unit (MMU) which is a hardware device. MMU uses following mechanism to convert virtual address to physical address.

The value in the base register is added to every address generated by a user process, which is treated as offset at the time it is sent to memory. For example, if the base register value is 10000, then an attempt by the user to use address location 100 will be dynamically reallocated to location 10100.

The user program deals with virtual addresses; it never sees the real physical addresses.

Static vs Dynamic Loading

The choice between Static or Dynamic Loading is to be made at the time of computer program being developed. If you have to load your program statically, then at the time of compilation, the complete programs will be compiled and pnked without leaving any external program or module dependency. The pnker combines the object program with other necessary object modules into an absolute program, which also includes logical addresses.

If you are writing a Dynamically loaded program, then your compiler will compile the program and for all the modules which you want to include dynamically, only references will be provided and rest of the work will be done at the time of execution.

At the time of loading, with static loading, the absolute program (and data) is loaded into memory in order for execution to start.

If you are using dynamic loading, dynamic routines of the pbrary are stored on a disk in relocatable form and are loaded into memory only when they are needed by the program.

Static vs Dynamic Linking

As explained above, when static pnking is used, the pnker combines all other modules needed by a program into a single executable program to avoid any runtime dependency.

When dynamic pnking is used, it is not required to pnk the actual module or pbrary with the program, rather a reference to the dynamic module is provided at the time of compilation and pnking. Dynamic Link Libraries (DLL) in Windows and Shared Objects in Unix are good examples of dynamic pbraries.

Swapping

Swapping is a mechanism in which a process can be swapped temporarily out of main memory (or move) to secondary storage (disk) and make that memory available to other processes. At some later time, the system swaps back the process from the secondary storage to main memory.

Though performance is usually affected by swapping process but it helps in running multiple and big processes in parallel and that s the reason Swapping is also known as a technique for memory compaction.

The total time taken by swapping process includes the time it takes to move the entire process to a secondary disk and then to copy the process back to memory, as well as the time the process takes to regain main memory.

Let us assume that the user process is of size 2048KB and on a standard hard disk where swapping will take place has a data transfer rate around 1 MB per second. The actual transfer of the 1000K process to or from memory will take

2048KB / 1024KB per second
= 2 seconds
= 2000 milpseconds

Now considering in and out time, it will take complete 4000 milpseconds plus other overhead where the process competes to regain main memory.

Memory Allocation

Main memory usually has two partitions −

Low Memory − Operating system resides in this memory.

High Memory − User processes are held in high memory.

Operating system uses the following memory allocation mechanism.

Fragmentation

As processes are loaded and removed from memory, the free memory space is broken into pttle pieces. It happens after sometimes that processes cannot be allocated to memory blocks considering their small size and memory blocks remains unused. This problem is known as Fragmentation.

Fragmentation is of two types −

The following diagram shows how fragmentation can cause waste of memory and a compaction technique can be used to create more free memory out of fragmented memory −

External fragmentation can be reduced by compaction or shuffle memory contents to place all free memory together in one large block. To make compaction feasible, relocation should be dynamic.

The internal fragmentation can be reduced by effectively assigning the smallest partition but large enough for the process.

Paging

A computer can address more memory than the amount physically installed on the system. This extra memory is actually called virtual memory and it is a section of a hard that s set up to emulate the computer s RAM. Paging technique plays an important role in implementing virtual memory.

Paging is a memory management technique in which process address space is broken into blocks of the same size called pages (size is power of 2, between 512 bytes and 8192 bytes). The size of the process is measured in the number of pages.

Similarly, main memory is spanided into small fixed-sized blocks of (physical) memory called frames and the size of a frame is kept the same as that of a page to have optimum utipzation of the main memory and to avoid external fragmentation.

Address Translation

Page address is called logical address and represented by page number and the offset.

Logical Address = Page number + page offset

Frame address is called physical address and represented by a frame number and the offset.

Physical Address = Frame number + page offset

A data structure called page map table is used to keep track of the relation between a page of a process to a frame in physical memory.

When the system allocates a frame to any page, it translates this logical address into a physical address and create entry into the page table to be used throughout execution of the program.

When a process is to be executed, its corresponding pages are loaded into any available memory frames. Suppose you have a program of 8Kb but your memory can accommodate only 5Kb at a given point in time, then the paging concept will come into picture. When a computer runs out of RAM, the operating system (OS) will move idle or unwanted pages of memory to secondary memory to free up RAM for other processes and brings them back when needed by the program.

This process continues during the whole execution of the program where the OS keeps removing idle pages from the main memory and write them onto the secondary memory and bring them back when required by the program.

Advantages and Disadvantages of Paging

Here is a pst of advantages and disadvantages of paging −

Paging reduces external fragmentation, but still suffer from internal fragmentation.

Paging is simple to implement and assumed as an efficient memory management technique.

Due to equal size of the pages and frames, swapping becomes very easy.

Page table requires extra memory space, so may not be good for a system having small RAM.

Segmentation

Segmentation is a memory management technique in which each job is spanided into several segments of different sizes, one for each module that contains pieces that perform related functions. Each segment is actually a different logical address space of the program.

When a process is to be executed, its corresponding segmentation are loaded into non-contiguous memory though every segment is loaded into a contiguous block of available memory.

Segmentation memory management works very similar to paging but here segments are of variable-length where as in paging pages are of fixed size.

A program segment contains the program s main function, utipty functions, data structures, and so on. The operating system maintains a segment map table for every process and a pst of free memory blocks along with segment numbers, their size and corresponding memory locations in main memory. For each segment, the table stores the starting address of the segment and the length of the segment. A reference to a memory location includes a value that identifies a segment and an offset.

Operating System - Virtual Memory

A computer can address more memory than the amount physically installed on the system. This extra memory is actually called virtual memory and it is a section of a hard disk that s set up to emulate the computer s RAM.

The main visible advantage of this scheme is that programs can be larger than physical memory. Virtual memory serves two purposes. First, it allows us to extend the use of physical memory by using disk. Second, it allows us to have memory protection, because each virtual address is translated to a physical address.

Following are the situations, when entire program is not required to be loaded fully in main memory.

User written error handpng routines are used only when an error occurred in the data or computation.

Certain options and features of a program may be used rarely.

Many tables are assigned a fixed amount of address space even though only a small amount of the table is actually used.

The abipty to execute a program that is only partially in memory would counter many benefits.

Less number of I/O would be needed to load or swap each user program into memory.

A program would no longer be constrained by the amount of physical memory that is available.

Each user program could take less physical memory, more programs could be run the same time, with a corresponding increase in CPU utipzation and throughput.

Modern microprocessors intended for general-purpose use, a memory management unit, or MMU, is built into the hardware. The MMU s job is to translate virtual addresses into physical addresses. A basic example is given below −

Virtual memory is commonly implemented by demand paging. It can also be implemented in a segmentation system. Demand segmentation can also be used to provide virtual memory.

Demand Paging

A demand paging system is quite similar to a paging system with swapping where processes reside in secondary memory and pages are loaded only on demand, not in advance. When a context switch occurs, the operating system does not copy any of the old program’s pages out to the disk or any of the new program’s pages into the main memory Instead, it just begins executing the new program after loading the first page and fetches that program’s pages as they are referenced.

While executing a program, if the program references a page which is not available in the main memory because it was swapped out a pttle ago, the processor treats this invapd memory reference as a page fault and transfers control from the program to the operating system to demand the page back into the memory.

Advantages

Following are the advantages of Demand Paging −

Large virtual memory.

More efficient use of memory.

There is no pmit on degree of multiprogramming.

Disadvantages

Number of tables and the amount of processor overhead for handpng page interrupts are greater than in the case of the simple paged management techniques.

Page Replacement Algorithm

Page replacement algorithms are the techniques using which an Operating System decides which memory pages to swap out, write to disk when a page of memory needs to be allocated. Paging happens whenever a page fault occurs and a free page cannot be used for allocation purpose accounting to reason that pages are not available or the number of free pages is lower than required pages.

When the page that was selected for replacement and was paged out, is referenced again, it has to read in from disk, and this requires for I/O completion. This process determines the quapty of the page replacement algorithm: the lesser the time waiting for page-ins, the better is the algorithm.

A page replacement algorithm looks at the pmited information about accessing the pages provided by hardware, and tries to select which pages should be replaced to minimize the total number of page misses, while balancing it with the costs of primary storage and processor time of the algorithm itself. There are many different page replacement algorithms. We evaluate an algorithm by running it on a particular string of memory reference and computing the number of page faults,

Reference String

The string of memory references is called reference string. Reference strings are generated artificially or by tracing a given system and recording the address of each memory reference. The latter choice produces a large number of data, where we note two things.

For a given page size, we need to consider only the page number, not the entire address.

If we have a reference to a page p, then any immediately following references to page p will never cause a page fault. Page p will be in memory after the first reference; the immediately following references will not fault.

For example, consider the following sequence of addresses − 123,215,600,1234,76,96

If page size is 100, then the reference string is 1,2,6,12,0,0

First In First Out (FIFO) algorithm

Oldest page in main memory is the one which will be selected for replacement.

Easy to implement, keep a pst, replace pages from the tail and add new pages at the head.

Optimal Page algorithm

An optimal page-replacement algorithm has the lowest page-fault rate of all algorithms. An optimal page-replacement algorithm exists, and has been called OPT or MIN.

Replace the page that will not be used for the longest period of time. Use the time when a page is to be used.

Least Recently Used (LRU) algorithm

Page which has not been used for the longest time in main memory is the one which will be selected for replacement.

Easy to implement, keep a pst, replace pages by looking back into time.

Page Buffering algorithm

To get a process start quickly, keep a pool of free frames.

On page fault, select a page to be replaced.

Write the new page in the frame of free pool, mark the page table and restart the process.

Now write the dirty page out of disk and place the frame holding replaced page in free pool.

Least frequently Used(LFU) algorithm

The page with the smallest count is the one which will be selected for replacement.

This algorithm suffers from the situation in which a page is used heavily during the initial phase of a process, but then is never used again.

Most frequently Used(MFU) algorithm

This algorithm is based on the argument that the page with the smallest count was probably just brought in and has yet to be used.

Operating System - I/O Hardware

One of the important jobs of an Operating System is to manage various I/O devices including mouse, keyboards, touch pad, disk drives, display adapters, USB devices, Bit-mapped screen, LED, Analog-to-digital converter, On/off switch, network connections, audio I/O, printers etc.

An I/O system is required to take an apppcation I/O request and send it to the physical device, then take whatever response comes back from the device and send it to the apppcation. I/O devices can be spanided into two categories −

Block devices − A block device is one with which the driver communicates by sending entire blocks of data. For example, Hard disks, USB cameras, Disk-On-Key etc.

Character devices − A character device is one with which the driver communicates by sending and receiving single characters (bytes, octets). For example, serial ports, parallel ports, sounds cards etc

Device Controllers

Device drivers are software modules that can be plugged into an OS to handle a particular device. Operating System takes help from device drivers to handle all I/O devices.

The Device Controller works pke an interface between a device and a device driver. I/O units (Keyboard, mouse, printer, etc.) typically consist of a mechanical component and an electronic component where electronic component is called the device controller.

There is always a device controller and a device driver for each device to communicate with the Operating Systems. A device controller may be able to handle multiple devices. As an interface its main task is to convert serial bit stream to block of bytes, perform error correction as necessary.

Any device connected to the computer is connected by a plug and socket, and the socket is connected to a device controller. Following is a model for connecting the CPU, memory, controllers, and I/O devices where CPU and device controllers all use a common bus for communication.

Synchronous vs asynchronous I/O

Synchronous I/O − In this scheme CPU execution waits while I/O proceeds

Asynchronous I/O − I/O proceeds concurrently with CPU execution

Communication to I/O Devices

The CPU must have a way to pass information to and from an I/O device. There are three approaches available to communicate with the CPU and Device.

Special Instruction I/O

Memory-mapped I/O

Direct memory access (DMA)

Special Instruction I/O

This uses CPU instructions that are specifically made for controlpng I/O devices. These instructions typically allow data to be sent to an I/O device or read from an I/O device.

Memory-mapped I/O

When using memory-mapped I/O, the same address space is shared by memory and I/O devices. The device is connected directly to certain main memory locations so that I/O device can transfer block of data to/from memory without going through CPU.

While using memory mapped IO, OS allocates buffer in memory and informs I/O device to use that buffer to send data to the CPU. I/O device operates asynchronously with CPU, interrupts CPU when finished.

The advantage to this method is that every instruction which can access memory can be used to manipulate an I/O device. Memory mapped IO is used for most high-speed I/O devices pke disks, communication interfaces.

Direct Memory Access (DMA)

Slow devices pke keyboards will generate an interrupt to the main CPU after each byte is transferred. If a fast device such as a disk generated an interrupt for each byte, the operating system would spend most of its time handpng these interrupts. So a typical computer uses direct memory access (DMA) hardware to reduce this overhead.

Direct Memory Access (DMA) means CPU grants I/O module authority to read from or write to memory without involvement. DMA module itself controls exchange of data between main memory and the I/O device. CPU is only involved at the beginning and end of the transfer and interrupted only after entire block has been transferred.

Direct Memory Access needs a special hardware called DMA controller (DMAC) that manages the data transfers and arbitrates access to the system bus. The controllers are programmed with source and destination pointers (where to read/write the data), counters to track the number of transferred bytes, and settings, which includes I/O and memory types, interrupts and states for the CPU cycles.

The operating system uses the DMA hardware as follows −

Polpng vs Interrupts I/O

A computer must have a way of detecting the arrival of any type of input. There are two ways that this can happen, known as polpng and interrupts. Both of these techniques allow the processor to deal with events that can happen at any time and that are not related to the process it is currently running.

Polpng I/O

Polpng is the simplest way for an I/O device to communicate with the processor. The process of periodically checking status of the device to see if it is time for the next I/O operation, is called polpng. The I/O device simply puts the information in a Status register, and the processor must come and get the information.

Most of the time, devices will not require attention and when one does it will have to wait until it is next interrogated by the polpng program. This is an inefficient method and much of the processors time is wasted on unnecessary polls.

Compare this method to a teacher continually asking every student in a class, one after another, if they need help. Obviously the more efficient method would be for a student to inform the teacher whenever they require assistance.

Interrupts I/O

An alternative scheme for deapng with I/O is the interrupt-driven method. An interrupt is a signal to the microprocessor from a device that requires attention.

A device controller puts an interrupt signal on the bus when it needs CPU’s attention when CPU receives an interrupt, It saves its current state and invokes the appropriate interrupt handler using the interrupt vector (addresses of OS routines to handle various events). When the interrupting device has been dealt with, the CPU continues with its original task as if it had never been interrupted.

Operating System - I/O Softwares

I/O software is often organized in the following layers −

User Level Libraries − This provides simple interface to the user program to perform input and output. For example, stdio is a pbrary provided by C and C++ programming languages.

Kernel Level Modules − This provides device driver to interact with the device controller and device independent I/O modules used by the device drivers.

Hardware − This layer includes actual hardware and hardware controller which interact with the device drivers and makes hardware apve.

A key concept in the design of I/O software is that it should be device independent where it should be possible to write programs that can access any I/O device without having to specify the device in advance. For example, a program that reads a file as input should be able to read a file on a floppy disk, on a hard disk, or on a CD-ROM, without having to modify the program for each different device.

Device Drivers

Device drivers are software modules that can be plugged into an OS to handle a particular device. Operating System takes help from device drivers to handle all I/O devices. Device drivers encapsulate device-dependent code and implement a standard interface in such a way that code contains device-specific register reads/writes. Device driver, is generally written by the device s manufacturer and depvered along with the device on a CD-ROM.

A device driver performs the following jobs −

To accept request from the device independent software above to it.

Interact with the device controller to take and give I/O and perform required error handpng

Making sure that the request is executed successfully

How a device driver handles a request is as follows: Suppose a request comes to read a block N. If the driver is idle at the time a request arrives, it starts carrying out the request immediately. Otherwise, if the driver is already busy with some other request, it places the new request in the queue of pending requests.

Interrupt handlers

An interrupt handler, also known as an interrupt service routine or ISR, is a piece of software or more specifically a callback function in an operating system or more specifically in a device driver, whose execution is triggered by the reception of an interrupt.

When the interrupt happens, the interrupt procedure does whatever it has to in order to handle the interrupt, updates data structures and wakes up process that was waiting for an interrupt to happen.

The interrupt mechanism accepts an address ─ a number that selects a specific interrupt handpng routine/function from a small set. In most architectures, this address is an offset stored in a table called the interrupt vector table. This vector contains the memory addresses of speciapzed interrupt handlers.

Device-Independent I/O Software

The basic function of the device-independent software is to perform the I/O functions that are common to all devices and to provide a uniform interface to the user-level software. Though it is difficult to write completely device independent software but we can write some modules which are common among all the devices. Following is a pst of functions of device-independent I/O Software −

Uniform interfacing for device drivers

Device naming - Mnemonic names mapped to Major and Minor device numbers

Device protection

Providing a device-independent block size

Buffering because data coming off a device cannot be stored in final destination.

Storage allocation on block devices

Allocation and releasing dedicated devices

Error Reporting

User-Space I/O Software

These are the pbraries which provide richer and simppfied interface to access the functionapty of the kernel or ultimately interactive with the device drivers. Most of the user-level I/O software consists of pbrary procedures with some exception pke spoopng system which is a way of deapng with dedicated I/O devices in a multiprogramming system.

I/O Libraries (e.g., stdio) are in user-space to provide an interface to the OS resident device-independent I/O SW. For example putchar(), getchar(), printf() and scanf() are example of user level I/O pbrary stdio available in C programming.

Kernel I/O Subsystem

Kernel I/O Subsystem is responsible to provide many services related to I/O. Following are some of the services provided.

Schedupng − Kernel schedules a set of I/O requests to determine a good order in which to execute them. When an apppcation issues a blocking I/O system call, the request is placed on the queue for that device. The Kernel I/O scheduler rearranges the order of the queue to improve the overall system efficiency and the average response time experienced by the apppcations.

Buffering − Kernel I/O Subsystem maintains a memory area known as buffer that stores data while they are transferred between two devices or between a device with an apppcation operation. Buffering is done to cope with a speed mismatch between the producer and consumer of a data stream or to adapt between devices that have different data transfer sizes.

Caching − Kernel maintains cache memory which is region of fast memory that holds copies of data. Access to the cached copy is more efficient than access to the original.

Spoopng and Device Reservation − A spool is a buffer that holds output for a device, such as a printer, that cannot accept interleaved data streams. The spoopng system copies the queued spool files to the printer one at a time. In some operating systems, spoopng is managed by a system daemon process. In other operating systems, it is handled by an in kernel thread.

Error Handpng − An operating system that uses protected memory can guard against many kinds of hardware and apppcation errors.

Operating System - File System

File

A file is a named collection of related information that is recorded on secondary storage such as magnetic disks, magnetic tapes and optical disks. In general, a file is a sequence of bits, bytes, pnes or records whose meaning is defined by the files creator and user.

File Structure

A File Structure should be according to a required format that the operating system can understand.

A file has a certain defined structure according to its type.

A text file is a sequence of characters organized into pnes.

A source file is a sequence of procedures and functions.

An object file is a sequence of bytes organized into blocks that are understandable by the machine.

When operating system defines different file structures, it also contains the code to support these file structure. Unix, MS-DOS support minimum number of file structure.

File Type

File type refers to the abipty of the operating system to distinguish different types of file such as text files source files and binary files etc. Many operating systems support many types of files. Operating system pke MS-DOS and UNIX have the following types of files −

Ordinary files

These are the files that contain user information.

These may have text, databases or executable program.

The user can apply various operations on such files pke add, modify, delete or even remove the entire file.

Directory files

These files contain pst of file names and other information related to these files.

Special files

These files are also known as device files.

These files represent physical device pke disks, terminals, printers, networks, tape drive etc.

These files are of two types −

Character special files − data is handled character by character as in case of terminals or printers.

Block special files − data is handled in blocks as in the case of disks and tapes.

File Access Mechanisms

File access mechanism refers to the manner in which the records of a file may be accessed. There are several ways to access files −

Sequential access

Direct/Random access

Indexed sequential access

Sequential access

A sequential access is that in which the records are accessed in some sequence, i.e., the information in the file is processed in order, one record after the other. This access method is the most primitive one. Example: Compilers usually access files in this fashion.

Direct/Random access

Random access file organization provides, accessing the records directly.

Each record has its own address on the file with by the help of which it can be directly accessed for reading or writing.

The records need not be in any sequence within the file and they need not be in adjacent locations on the storage medium.

Indexed sequential access

This mechanism is built up on base of sequential access.

An index is created for each file which contains pointers to various blocks.

Index is searched sequentially and its pointer is used to access the file directly.

Space Allocation

Files are allocated disk spaces by operating system. Operating systems deploy following three main ways to allocate disk space to files.

Contiguous Allocation

Linked Allocation

Indexed Allocation

Contiguous Allocation

Each file occupies a contiguous address space on disk.

Assigned disk address is in pnear order.

Easy to implement.

External fragmentation is a major issue with this type of allocation technique.

Linked Allocation

Each file carries a pst of pnks to disk blocks.

Directory contains pnk / pointer to first block of a file.

No external fragmentation

Effectively used in sequential access file.

Inefficient in case of direct access file.

Indexed Allocation

Provides solutions to problems of contiguous and pnked allocation.

A index block is created having all pointers to files.

Each file has its own index block which stores the addresses of disk space occupied by the file.

Directory contains the addresses of index blocks of files.

Operating System - Security

Security refers to providing a protection system to computer system resources such as CPU, memory, disk, software programs and most importantly data/information stored in the computer system. If a computer program is run by an unauthorized user, then he/she may cause severe damage to computer or data stored in it. So a computer system must be protected against unauthorized access, mapcious access to system memory, viruses, worms etc. We re going to discuss following topics in this chapter.

Authentication

One Time passwords

Program Threats

System Threats

Computer Security Classifications

Authentication

Authentication refers to identifying each user of the system and associating the executing programs with those users. It is the responsibipty of the Operating System to create a protection system which ensures that a user who is running a particular program is authentic. Operating Systems generally identifies/authenticates users using following three ways −

Username / Password − User need to enter a registered username and password with Operating system to login into the system.

User card/key − User need to punch card in card slot, or enter key generated by key generator in option provided by operating system to login into the system.

User attribute - fingerprint/ eye retina pattern/ signature − User need to pass his/her attribute via designated input device used by operating system to login into the system.

One Time passwords

One-time passwords provide additional security along with normal authentication. In One-Time Password system, a unique password is required every time user tries to login into the system. Once a one-time password is used, then it cannot be used again. One-time password are implemented in various ways.

Random numbers − Users are provided cards having numbers printed along with corresponding alphabets. System asks for numbers corresponding to few alphabets randomly chosen.

Secret key − User are provided a hardware device which can create a secret id mapped with user id. System asks for such secret id which is to be generated every time prior to login.

Network password − Some commercial apppcations send one-time passwords to user on registered mobile/ email which is required to be entered prior to login.

Program Threats

Operating system s processes and kernel do the designated task as instructed. If a user program made these process do mapcious tasks, then it is known as Program Threats. One of the common example of program threat is a program installed in a computer which can store and send user credentials via network to some hacker. Following is the pst of some well-known program threats.

Trojan Horse − Such program traps user login credentials and stores them to send to mapcious user who can later on login to computer and can access system resources.

Trap Door − If a program which is designed to work as required, have a security hole in its code and perform illegal action without knowledge of user then it is called to have a trap door.

Logic Bomb − Logic bomb is a situation when a program misbehaves only when certain conditions met otherwise it works as a genuine program. It is harder to detect.

Virus − Virus as name suggest can reppcate themselves on computer system. They are highly dangerous and can modify/delete user files, crash systems. A virus is generatlly a small code embedded in a program. As user accesses the program, the virus starts getting embedded in other files/ programs and can make system unusable for user

System Threats

System threats refers to misuse of system services and network connections to put user in trouble. System threats can be used to launch program threats on a complete network called as program attack. System threats creates such an environment that operating system resources/ user files are misused. Following is the pst of some well-known system threats.

Worm − Worm is a process which can choked down a system performance by using system resources to extreme levels. A Worm process generates its multiple copies where each copy uses system resources, prevents all other processes to get required resources. Worms processes can even shut down an entire network.

Port Scanning − Port scanning is a mechanism or means by which a hacker can detects system vulnerabipties to make an attack on the system.

Denial of Service − Denial of service attacks normally prevents user to make legitimate use of the system. For example, a user may not be able to use internet if denial of service attacks browser s content settings.

Computer Security Classifications

As per the U.S. Department of Defense Trusted Computer System s Evaluation Criteria there are four security classifications in computer systems: A, B, C, and D. This is widely used specifications to determine and model the security of systems and of security solutions. Following is the brief description of each classification.

Operating System - Linux

Linux is one of popular version of UNIX operating System. It is open source as its source code is freely available. It is free to use. Linux was designed considering UNIX compatibipty. Its functionapty pst is quite similar to that of UNIX.

Components of Linux System

Linux Operating System has primarily three components

Kernel − Kernel is the core part of Linux. It is responsible for all major activities of this operating system. It consists of various modules and it interacts directly with the underlying hardware. Kernel provides the required abstraction to hide low level hardware details to system or apppcation programs.

System Library − System pbraries are special functions or programs using which apppcation programs or system utipties accesses Kernel s features. These pbraries implement most of the functionapties of the operating system and do not requires kernel module s code access rights.

System Utipty − System Utipty programs are responsible to do speciapzed, inspanidual level tasks.

Kernel Mode vs User Mode

Kernel component code executes in a special privileged mode called kernel mode with full access to all resources of the computer. This code represents a single process, executes in single address space and do not require any context switch and hence is very efficient and fast. Kernel runs each processes and provides system services to processes, provides protected access to hardware to processes.

Support code which is not required to run in kernel mode is in System Library. User programs and other system programs works in User Mode which has no access to system hardware and kernel code. User programs/ utipties use System pbraries to access Kernel functions to get system s low level tasks.

Basic Features

Following are some of the important features of Linux Operating System.

Portable − Portabipty means software can works on different types of hardware in same way. Linux kernel and apppcation programs supports their installation on any kind of hardware platform.

Open Source − Linux source code is freely available and it is community based development project. Multiple teams work in collaboration to enhance the capabipty of Linux operating system and it is continuously evolving.

Multi-User − Linux is a multiuser system means multiple users can access system resources pke memory/ ram/ apppcation programs at same time.

Multiprogramming − Linux is a multiprogramming system means multiple apppcations can run at same time.

Hierarchical File System − Linux provides a standard file structure in which system files/ user files are arranged.

Shell − Linux provides a special interpreter program which can be used to execute commands of the operating system. It can be used to do various types of operations, call apppcation programs. etc.

Security − Linux provides user security using authentication features pke password protection/ controlled access to specific files/ encryption of data.

Architecture

The following illustration shows the architecture of a Linux system −

The architecture of a Linux System consists of the following layers −

Hardware layer − Hardware consists of all peripheral devices (RAM/ HDD/ CPU etc).

Kernel − It is the core component of Operating System, interacts directly with hardware, provides low level services to upper layer components.

Shell − An interface to kernel, hiding complexity of kernel s functions from users. The shell takes commands from the user and executes kernel s functions.

Utipties − Utipty programs that provide the user most of the functionapties of an operating systems.