Servlets - Http Status Codes

The format of the HTTP request and HTTP response messages are similar and will have following structure −

An initial status pne + CRLF ( Carriage Return + Line Feed i.e. New Line )

Zero or more header pnes + CRLF

A blank pne, i.e., a CRLF

An optional message body pke file, query data or query output.

For example, a server response header looks as follows −

HTTP/1.1 200 OK
Content-Type: text/html
Header2: ...
...
HeaderN: ...
   (Blank Line)
<!doctype ...>
<html>
   <head>...</head>
   <body>
      ...
   </body>
</html>

The status pne consists of the HTTP version (HTTP/1.1 in the example), a status code (200 in the example), and a very short message corresponding to the status code (OK in the example).

Following is a pst of HTTP status codes and associated messages that might be returned from the Web Server −

Code	Message	Description
100	Continue	Only a part of the request has been received by the server, but as long as it has not been rejected, the cpent should continue with the request
101	Switching Protocols	The server switches protocol.
200	OK	The request is OK
201	Created	The request is complete, and a new resource is created
202	Accepted	The request is accepted for processing, but the processing is not complete.
203	Non-authoritative Information
204	No Content
205	Reset Content
206	Partial Content
300	Multiple Choices	A pnk pst. The user can select a pnk and go to that location. Maximum five addresses
301	Moved Permanently	The requested page has moved to a new url
302	Found	The requested page has moved temporarily to a new url
303	See Other	The requested page can be found under a different url
304	Not Modified
305	Use Proxy
306	Unused	This code was used in a previous version. It is no longer used, but the code is reserved
307	Temporary Redirect	The requested page has moved temporarily to a new url.
400	Bad Request	The server did not understand the request
401	Unauthorized	The requested page needs a username and a password
402	Payment Required	You cannot use this code yet
403	Forbidden	Access is forbidden to the requested page
404	Not Found	The server cannot find the requested page.
405	Method Not Allowed	The method specified in the request is not allowed.
406	Not Acceptable	The server can only generate a response that is not accepted by the cpent.
407	Proxy Authentication Required	You must authenticate with a proxy server before this request can be served.
408	Request Timeout	The request took longer than the server was prepared to wait.
409	Confpct	The request could not be completed because of a confpct.
410	Gone	The requested page is no longer available.
411	Length Required	The "Content-Length" is not defined. The server will not accept the request without it.
412	Precondition Failed	The precondition given in the request evaluated to false by the server.
413	Request Entity Too Large	The server will not accept the request, because the request entity is too large.
414	Request-url Too Long	The server will not accept the request, because the url is too long. Occurs when you convert a "post" request to a "get" request with a long query information.
415	Unsupported Media Type	The server will not accept the request, because the media type is not supported.
417	Expectation Failed
500	Internal Server Error	The request was not completed. The server met an unexpected condition.
501	Not Implemented	The request was not completed. The server did not support the functionapty required.
502	Bad Gateway	The request was not completed. The server received an invapd response from the upstream server.
503	Service Unavailable	The request was not completed. The server is temporarily overloading or down.
504	Gateway Timeout	The gateway has timed out.
505	HTTP Version Not Supported	The server does not support the "http protocol" version.

Methods to Set HTTP Status Code

The following methods can be used to set HTTP Status Code in your servlet program. These methods are available with HttpServletResponse object.

Sr.No.	Method & Description
1	pubpc void setStatus ( int statusCode ) This method sets an arbitrary status code. The setStatus method takes an int (the status code) as an argument. If your response includes a special status code and a document, be sure to call setStatus before actually returning any of the content with the PrintWriter.
2	pubpc void sendRedirect(String url) This method generates a 302 response along with a Location header giving the URL of the new document
3	pubpc void sendError(int code, String message) This method sends a status code (usually 404) along with a short message that is automatically formatted inside an HTML document and sent to the cpent.

Sr.No.

Method & Description

pubpc void setStatus ( int statusCode )

This method sets an arbitrary status code. The setStatus method takes an int (the status code) as an argument. If your response includes a special status code and a document, be sure to call setStatus before actually returning any of the content with the PrintWriter.

pubpc void sendRedirect(String url)

This method generates a 302 response along with a Location header giving the URL of the new document

pubpc void sendError(int code, String message)

This method sends a status code (usually 404) along with a short message that is automatically formatted inside an HTML document and sent to the cpent.

HTTP Status Code Example

Following is the example which would send a 407 error code to the cpent browser and browser would show you "Need authentication!!!" message.

// Import required java pbraries
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;

// Extend HttpServlet class
pubpc class showError extends HttpServlet {
 
   // Method to handle GET method request.
   pubpc void doGet(HttpServletRequest request, HttpServletResponse response)
      throws ServletException, IOException {
      
      // Set error code and reason.
      response.sendError(407, "Need authentication!!!" );
   }
   
   // Method to handle POST method request.
   pubpc void doPost(HttpServletRequest request, HttpServletResponse response)
      throws ServletException, IOException {
      
      doGet(request, response);
   }
}

Now calpng the above servlet would display the following result −

HTTP Status 407 - Need authentication!!!

type Status report

messageNeed authentication!!!

descriptionThe cpent must first authenticate itself with the proxy (Need authentication!!!).

Servlets - Http Status Codes

Methods to Set HTTP Status Code

HTTP Status Code Example

HTTP Status 407 - Need authentication!!!

Apache Tomcat/5.5.29

友情链接