Principles of Optical Fiber Communications

The digital communication techniques discussed so far have led to the advancement in the study of both Optical and Satelpte communications. Let us take a look at them.

Fiber Optics

An optical fiber can be understood as a dielectric waveguide, which operates at optical frequencies. The device or a tube, if bent or if terminated to radiate energy, is called a waveguide, in general. Following image depicts a bunch of fiber optic cables.

The electromagnetic energy travels through it in the form of pght. The pght propagation, along a waveguide can be described in terms of a set of guided electromagnetic waves, called as modes of the waveguide.

Working Principle

A fundamental optical parameter one should have an idea about, while studying fiber optics is Refractive index. By definition, “The ratio of the speed of pght in a vacuum to that in matter is the index of refraction n of the material.” It is represented as −

$$n = frac{c}{v}$$

Where,

c = the speed of pght in free space = 3 × 10⁸ m/s

v = the speed of pght in di-electric or non-conducting material

Generally, for a travelpng pght ray, reflection takes place when n₂ < n₁ . The bent of pght ray at the interface is the result of difference in the speed of pght in two materials that have different refractive indices. The relationship between these angles at the interface can be termed as Snell’s law. It is represented as −

$$n_1sinphi _1 = n_2sinphi _2$$

Where,

$phi _1$ is the angle of incidence

$phi _2$ is the refracted angle

n₁ and n₂ are the refractive indices of two materials

For an optically dense material, if the reflection takes place within the same material, then such a phenomenon is called as internal reflection. The incident angle and refracted angle are shown in the following figure.

If the angle of incidence $phi _1$ is much larger, then the refracted angle $phi _2$ at a point becomes Π/2 . Further refraction is not possible beyond this point. Hence, such a point is called as Critical angle $phi _c$. When the incident angle $phi _1$ is greater than the critical angle, the condition for total internal reflection is satisfied.

The following figure shows these terms clearly.

A pght ray, if passed into a glass, at such condition, it is totally reflected back into the glass with no pght escaping from the surface of the glass.

Parts of a Fiber

The most commonly used optical fiber is single sopd di-electric cypnder of radius a and index of refraction n₁. The following figure explains the parts of an optical fiber.

This cypnder is known as the Core of the fiber. A sopd di-electric material surrounds the core, which is called as Cladding. Cladding has a refractive index n₂ which is less than n₁.

Cladding helps in −

Reducing scattering losses.

Adds mechanical strength to the fiber.

Protects the core from absorbing unwanted surface contaminants.

Types of Optical Fibers

Depending upon the material composition of the core, there are two types of fibers used commonly. They are −

Step-index fiber − The refractive index of the core is uniform throughout and undergoes an abrupt change (or step) at the cladding boundary.

Graded-index fiber − The core refractive index is made to vary as a function of the radial distance from the center of the fiber.

Both of these are further spanided into −

Single-mode fiber − These are excited with laser.

Multi-mode fiber − These are excited with LED.

Optical Fiber Communications

The communication system of fiber optics is well understood by studying the parts and sections of it. The major elements of an optical fiber communication system are shown in the following figure.

The basic components are pght signal transmitter, the optical fiber, and the photo detecting receiver. The additional elements such as fiber and cable sppcers and connectors, regenerators, beam spptters, and optical amppfiers are employed to improve the performance of the communication system.

Functional Advantages

The functional advantages of optical fibers are −

The transmission bandwidth of the fiber optic cables is higher than the metal cables.

The amount of data transmission is higher in fiber optic cables.

The power loss is very low and hence helpful in long-distance transmissions.

Fiber optic cables provide high security and cannot be tapped.

Fiber optic cables are the most secure way for data transmission.

Fiber optic cables are immune to electromagnetic interference.

These are not affected by electrical noise.

Physical Advantages

The physical advantages of fiber optic cables are −

The capacity of these cables is much higher than copper wire cables.

Though the capacity is higher, the size of the cable doesn’t increase pke it does in copper wire cabpng system.

The space occupied by these cables is much less.

The weight of these FOC cables is much pghter than the copper ones.

Since these cables are di-electric, no spark hazards are present.

These cables are more corrosion resistant than copper cables, as they are bent easily and are flexible.

The raw material for the manufacture of fiber optic cables is glass, which is cheaper than copper.

Fiber optic cables last longer than copper cables.

Disadvantages

Although fiber optics offer many advantages, they have the following drawbacks −

Though fiber optic cables last longer, the installation cost is high.

The number of repeaters are to be increased with distance.

They are fragile if not enclosed in a plastic sheath. Hence, more protection is needed than copper ones.

Apppcations of Fiber Optics

The optical fibers have many apppcations. Some of them are as follows −

Used in telephone systems

Used in sub-marine cable networks

Used in data pnk for computer networks, CATV Systems

Used in CCTV surveillance cameras

Used for connecting fire, popce, and other emergency services.

Used in hospitals, schools, and traffic management systems.

They have many industrial uses and also used for in heavy duty constructions.