Euphoria - Operators-alljchome-开发者的教程家园

Euphoria Tutorial

Euphoria Useful Resources

Selected Reading

Euphoria - Operators

Euphoria provides a rich set of operators to manipulate variables. We can spanide all the Euphoria operators into the following groups −

Arithmetic Operators

Relational Operators

Logical Operators

Assignment Operators

Misc Operators

The Arithmetic Operators

Arithmetic operators are used in mathematical expressions in the same way that they are used in Algebra. The following table psts the arithmetic operators. Assume integer variable A holds 10 and variable B holds 20 then −

Show Examples

Operator	Description	Example
+	Addition - Adds values on either side of the operator	A + B will give 30
-	Subtraction - Subtracts right hand operand from left hand operand	A - B will give -10
*	Multippcation - Multippes values on either side of the operator	A * B will give 200
/	Division - Divides left hand operand by right hand operand	B / A will give 2
+	Unary plus - This has no impact on the variable value.	+B gives 20
-	Unary minus - This creates a negative value of the given variable.	-B gives -20

The Relational Operators

There are following relational operators supported by Euphoria language. Assume variable A holds 10 and variable B holds 20 then −

Show Examples

Operator	Description	Example
=	Checks if the value of two operands are equal or not, if yes then condition becomes true.	(A = B) is not true.
!=	Checks if the value of two operands are equal or not, if values are not equal then condition becomes true.	(A != B) is true.
>	Checks if the value of left operand is greater than the value of right operand, if yes then condition becomes true.	(A > B) is not true.
<	Checks if the value of left operand is less than the value of right operand, if yes then condition becomes true.	(A < B) is true.
>=	Checks if the value of left operand is greater than or equal to the value of right operand, if yes then condition becomes true.	(A >= B) is not true.
<=	Checks if the value of left operand is less than or equal to the value of right operand, if yes then condition becomes true.	(A <= B) is true.

The Logical Operators

The following table psts the logical operators. Assume boolean variables A holds 1 and variable B holds 0 then −

Show Examples

Operator	Description	Example
and	Called Logical AND operator. If both the operands are non zero then then condition becomes true.	(A and B) is false.
or	Called Logical OR Operator. If any of the two operands are non zero then then condition becomes true.	(A or B) is true.
xor	Called Logical XOR Operator. Condition is true if one of them is true, if both operands are true or false then condition becomes false.	(A xor B) is true.
not	Called Logical NOT Operator which negates the result. Using this operator, true becomes false and false becomes true	not(B) is true.

You can also apply these operators to numbers other than 1 or 0. The convention is: zero means false and non-zero means true.

The Assignment Operators

There are following assignment operators supported by Euphoria language −

Show Examples

Operator	Description	Example
=	Simple assignment operator, Assigns values from right side operands to left side operand	C = A + B will assigne value of A + B into C
+=	Add AND assignment operator, It adds right operand to the left operand and assign the result to left operand	C += A is equivalent to C = C + A
-=	Subtract AND assignment operator, It subtracts right operand from the left operand and assign the result to left operand	C -= A is equivalent to C = C - A
*=	Multiply AND assignment operator, It multippes right operand with the left operand and assign the result to left operand	C = A is equivalent to C = C A
/=	Divide AND assignment operator, It spanides left operand with the right operand and assign the result to left operand	C /= A is equivalent to C = C / A
&=	Concatenation operator	C &= {2} is same as C = {C} & {2}

Note − The equals symbol = used in an assignment statement is not an operator, it is just a part of the syntax.

Miscellaneous Operators

There are few other operators supported by Euphoria Language.

The & Operator

Any two objects may be concatenated using “&” operator. The result is a sequence with a length equal to the sum of the lengths of the concatenated objects.

For example −

#!/home/euphoria-4.0b2/bin/eui

sequence a, b, c
a = {1, 2, 3}
b = {4}
c = {1, 2, 3} & {4}

printf(1, "Value of c[1] %d
", c[1] )
printf(1, "Value of c[2] %d
", c[2] )
printf(1, "Value of c[3] %d
", c[3] )
printf(1, "Value of c[4] %d
", c[4] )

This produces the following result −

Value of c[1] 1
Value of c[2] 2
Value of c[3] 3
Value of c[4] 4

Precedence of Euphoria Operators

Operator precedence determines the grouping of terms in an expression. This affects how an expression is evaluated. Certain operators have higher precedence than others; for example, the multippcation operator has higher precedence than the addition operator.

For example, x = 7 + 3 * 2

Here, x is assigned 13, not 20 because operator * has higher precedence than +.

Hence it first starts with 3*2 and then adds into 7.

Here operators with the highest precedence appear at the top of the table, those with the lowest appear at the bottom. Within an expression, higher precedence operators is evaluated first.

Category	Operator	Associativity
Postfix	function/type calls
Unary	+ - ! not	Right to left
Multippcative	* /	Left to right
Additive	+ -	Left to right
Concatenation	&	Left to right
Relational	> >= < <=	Left to right
Equapty	= !=	Left to right
Logical AND	and	Left to right
Logical OR	or	Left to right
Logical XOR	xor	Left to right
Comma	,	Left to right

Euphoria - Operators

The Arithmetic Operators

The Relational Operators

The Logical Operators

The Assignment Operators

Miscellaneous Operators

The & Operator

Precedence of Euphoria Operators

友情链接