LTE Tutorial
LTE Useful Resources
Selected Reading
- LTE - Glossary
- LTE - OFDM Technology
- LTE - Communication Channels
- LTE - Layers Data Flow
- LTE - Protocol Stack Layers
- LTE - Radio Protocol Architecture
- LTE - Numbering & Addressing
- LTE - Roaming Architecture
- LTE - Network Architecture
- LTE - Basic Parameters
- LTE - Overview
- LTE - Home
LTE Useful Resources
Selected Reading
- Who is Who
- Computer Glossary
- HR Interview Questions
- Effective Resume Writing
- Questions and Answers
- UPSC IAS Exams Notes
LTE - Basic Parameters
LTE Basic Parameters
This section will summarize the Basic parameters of the LTE:
| Parameters | Description |
|---|---|
| Frequency range | UMTS FDD bands and TDD bands defined in 36.101(v860) Table 5.5.1, given below |
| Duplexing | FDD, TDD, half-duplex FDD |
| Channel coding | Turbo code |
| Mobipty | 350 km/h |
| Channel Bandwidth (MHz) |
1.4 3 5 10 15 20 |
| Transmission Bandwidth Configuration NRB : (1 resource block = 180kHz in 1ms TTI ) |
6 15 25 50 75 100 |
| Modulation Schemes | UL: QPSK, 16QAM, 64QAM(optional) DL: QPSK, 16QAM, 64QAM |
| Multiple Access Schemes | UL: SC-FDMA (Single Carrier Frequency Division Multiple Access) supports 50Mbps+ (20MHz spectrum) DL: OFDM (Orthogonal Frequency Division Multiple Access) supports 100Mbps+ (20MHz spectrum) |
| Multi-Antenna Technology | UL: Multi-user collaborative MIMO DL: TxAA, spatial multiplexing, CDD ,max 4x4 array |
| Peak data rate in LTE | UL: 75Mbps(20MHz bandwidth) DL: 150Mbps(UE Category 4, 2x2 MIMO, 20MHz bandwidth) DL: 300Mbps(UE category 5, 4x4 MIMO, 20MHz bandwidth) |
MIMO (Multiple Input Multiple Output) |
UL: 1 x 2, 1 x 4 DL: 2 x 2, 4 x 2, 4 x 4 |
| Coverage | 5 - 100km with spght degradation after 30km |
| QoS | E2E QOS allowing prioritization of different class of service |
| Latency | End-user latency < 10mS |
E-UTRA Operating Bands
Following is the table for E-UTRA operating bands taken from LTE Sepecification 36.101(v860) Table 5.5.1:
Advertisements