CNTK - Convolutional Neural Network

In this chapter, let us study how to construct a Convolutional Neural Network (CNN) in CNTK.

Introduction

Convolutional neural networks (CNNs) are also made up of neurons, that have learnable weights and biases. That’s why in this manner, they are pke ordinary neural networks (NNs).

If we recall the working of ordinary NNs, every neuron receives one or more inputs, takes a weighted sum and it passed through an activation function to produce the final output. Here, the question arises that if CNNs and ordinary NNs have so many similarities then what makes these two networks different to each other?

What makes them different is the treatment of input data and types of layers? The structure of input data is ignored in ordinary NN and all the data is converted into 1-D array before feeding it into the network.

But, Convolutional Neural Network architecture can consider the 2D structure of the images, process them and allow it to extract the properties that are specific to images. Moreover, CNNs have the advantage of having one or more Convolutional layers and poopng layer, which are the main building blocks of CNNs.

These layers are followed by one or more fully connected layers as in standard multilayer NNs. So, we can think of CNN, as a special case of fully connected networks.

Convolutional Neural Network (CNN) architecture

The architecture of CNN is basically a pst of layers that transforms the 3-dimensional, i.e. width, height and depth of image volume into a 3-dimensional output volume. One important point to note here is that, every neuron in the current layer is connected to a small patch of the output from the previous layer, which is pke overlaying a N*N filter on the input image.

It uses M filters, which are basically feature extractors that extract features pke edges, corner and so on. Following are the layers [INPUT-CONV-RELU-POOL-FC] that are used to construct Convolutional neural networks (CNNs)−

INPUT− As the name imppes, this layer holds the raw pixel values. Raw pixel values mean the data of the image as it is. Example, INPUT [64×64×3] is a 3-channeled RGB image of width-64, height-64 and depth-3.

CONV− This layer is one of the building blocks of CNNs as most of the computation is done in this layer. Example - if we use 6 filters on the above mentioned INPUT [64×64×3], this may result in the volume [64×64×6].

RELU−Also called rectified pnear unit layer, that apppes an activation function to the output of previous layer. In other manner, a non-pnearity would be added to the network by RELU.

POOL− This layer, i.e. Poopng layer is one other building block of CNNs. The main task of this layer is down-samppng, which means it operates independently on every spce of the input and resizes it spatially.

FC− It is called Fully Connected layer or more specifically the output layer. It is used to compute output class score and the resulting output is volume of the size 1*1*L where L is the number corresponding to class score.

The diagram below represents the typical architecture of CNNs−

Creating CNN structure

We have seen the architecture and the basics of CNN, now we are going to building convolutional network using CNTK. Here, we will first see how to put together the structure of the CNN and then we will look at how to train the parameters of it.

At last we’ll see, how we can improve the neural network by changing its structure with various different layer setups. We are going to use MNIST image dataset.

So, first let’s create a CNN structure. Generally, when we build a CNN for recognizing patterns in images, we do the following−

We use a combination of convolution and poopng layers.

One or more hidden layer at the end of the network.

At last, we finish the network with a softmax layer for classification purpose.

With the help of following steps, we can build the network structure−

Step 1− First, we need to import the required layers for CNN.

from cntk.layers import Convolution2D, Sequential, Dense, MaxPoopng

Step 2− Next, we need to import the activation functions for CNN.

from cntk.ops import log_softmax, relu

Step 3− After that in order to initiapze the convolutional layers later, we need to import the glorot_uniform_initiapzer as follows−

from cntk.initiapzer import glorot_uniform

Step 4− Next, to create input variables import the input_variable function. And import default_option function, to make configuration of NN a bit easier.

from cntk import input_variable, default_options

Step 5− Now to store the input images, create a new input_variable. It will contain three channels namely red, green and blue. It would have the size of 28 by 28 pixels.

features = input_variable((3,28,28))

Step 6−Next, we need to create another input_variable to store the labels to predict.

labels = input_variable(10)

Step 7− Now, we need to create the default_option for the NN. And, we need to use the glorot_uniform as the initiapzation function.

with default_options(initiapzation=glorot_uniform, activation=relu):

Step 8− Next, in order to set the structure of the NN, we need to create a new Sequential layer set.

Step 9− Now we need to add a Convolutional2D layer with a filter_shape of 5 and a strides setting of 1, within the Sequential layer set. Also, enable padding, so that the image is padded to retain the original dimensions.

model = Sequential([
Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=8, pad=True),

Step 10− Now it’s time to add a MaxPoopng layer with filter_shape of 2, and a strides setting of 2 to compress the image by half.

MaxPoopng(filter_shape=(2,2), strides=(2,2)),

Step 11− Now, as we did in step 9, we need to add another Convolutional2D layer with a filter_shape of 5 and a strides setting of 1, use 16 filters. Also, enable padding, so that, the size of the image produced by the previous poopng layer should be retained.

Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=16, pad=True),

Step 12− Now, as we did in step 10, add another MaxPoopng layer with a filter_shape of 3 and a strides setting of 3 to reduce the image to a third.

MaxPoopng(filter_shape=(3,3), strides=(3,3)),

Step 13− At last, add a Dense layer with ten neurons for the 10 possible classes, the network can predict. In order to turn the network into a classification model, use a log_siftmax activation function.

Dense(10, activation=log_softmax)
])

Complete Example for creating CNN structure

from cntk.layers import Convolution2D, Sequential, Dense, MaxPoopng
from cntk.ops import log_softmax, relu
from cntk.initiapzer import glorot_uniform
from cntk import input_variable, default_options
features = input_variable((3,28,28))
labels = input_variable(10)
with default_options(initiapzation=glorot_uniform, activation=relu):
model = Sequential([
   Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=8, pad=True),
MaxPoopng(filter_shape=(2,2), strides=(2,2)),
   Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=16, pad=True),
MaxPoopng(filter_shape=(3,3), strides=(3,3)),
Dense(10, activation=log_softmax)
])
z = model(features)

Training CNN with images

As we have created the structure of the network, it’s time to train the network. But before starting the training of our network, we need to set up minibatch sources, because training a NN that works with images requires more memory, than most computers have.

We have already created minibatch sources in previous sections. Following is the Python code to set up two minibatch sources −

As we have the create_datasource function, we can now create two separate data sources (training and testing one) to train the model.

train_datasource = create_datasource( mnist_train )
test_datasource = create_datasource( mnist_test , max_sweeps=1, train=False)

Now, as we have prepared the images, we can start training of our NN. As we did in previous sections, we can use the train method on the loss function to kick off the training. Following is the code for this −

from cntk import Function
from cntk.losses import cross_entropy_with_softmax
from cntk.metrics import classification_error
from cntk.learners import sgd
@Function
def criterion_factory(output, targets):
loss = cross_entropy_with_softmax(output, targets)
metric = classification_error(output, targets)
return loss, metric
loss = criterion_factory(z, labels)
learner = sgd(z.parameters, lr=0.2)

With the help of previous code, we have setup the loss and learner for the NN. The following code will train and vapdate the NN−

from cntk.logging import ProgressPrinter
from cntk.train import TestConfig
progress_writer = ProgressPrinter(0)
test_config = TestConfig(test_datasource)
input_map = {
   features: train_datasource.streams.features,
   labels: train_datasource.streams.labels
}
loss.train(train_datasource,
     max_epochs=10,
     minibatch_size=64,
     epoch_size=60000,
        parameter_learners=[learner],
     model_inputs_to_streams=input_map,
     callbacks=[progress_writer, test_config])

Complete Implementation Example

from cntk.layers import Convolution2D, Sequential, Dense, MaxPoopng
from cntk.ops import log_softmax, relu
from cntk.initiapzer import glorot_uniform
from cntk import input_variable, default_options
features = input_variable((3,28,28))
labels = input_variable(10)
with default_options(initiapzation=glorot_uniform, activation=relu):
model = Sequential([
   Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=8, pad=True),
MaxPoopng(filter_shape=(2,2), strides=(2,2)),
   Convolution2D(filter_shape=(5,5), strides=(1,1), num_filters=16, pad=True),
MaxPoopng(filter_shape=(3,3), strides=(3,3)),
Dense(10, activation=log_softmax)
])
z = model(features)
import os
from cntk.io import MinibatchSource, StreamDef, StreamDefs, ImageDeseriapzer, INFINITELY_REPEAT
import cntk.io.transforms as xforms
def create_datasource(folder, train=True, max_sweeps=INFINITELY_REPEAT):
   mapping_file = os.path.join(folder,  mapping.bin )
   image_transforms = []
   if train:
    image_transforms += [
     xforms.crop(crop_type= randomside , side_ratio=0.8),
     xforms.scale(width=28, height=28, channels=3, interpolations= pnear )
]
   stream_definitions = StreamDefs(
   features=StreamDef(field= image , transforms=image_transforms),
    labels=StreamDef(field= label , shape=10)
)
   deseriapzer = ImageDeseriapzer(mapping_file, stream_definitions)
return MinibatchSource(deseriapzer, max_sweeps=max_sweeps)
train_datasource = create_datasource( mnist_train )
test_datasource = create_datasource( mnist_test , max_sweeps=1, train=False)
from cntk import Function
from cntk.losses import cross_entropy_with_softmax
from cntk.metrics import classification_error
from cntk.learners import sgd
@Function
def criterion_factory(output, targets):
   loss = cross_entropy_with_softmax(output, targets)
   metric = classification_error(output, targets)
return loss, metric
loss = criterion_factory(z, labels)
learner = sgd(z.parameters, lr=0.2)
from cntk.logging import ProgressPrinter
from cntk.train import TestConfig
progress_writer = ProgressPrinter(0)
test_config = TestConfig(test_datasource)
input_map = {
   features: train_datasource.streams.features,
   labels: train_datasource.streams.labels
}
loss.train(train_datasource,
     max_epochs=10,
     minibatch_size=64,
     epoch_size=60000,
        parameter_learners=[learner],
     model_inputs_to_streams=input_map,
     callbacks=[progress_writer, test_config])

Output

-------------------------------------------------------------------
average  since  average  since  examples
loss     last   metric   last
------------------------------------------------------
Learning rate per minibatch: 0.2
142      142      0.922   0.922    64
1.35e+06 1.51e+07 0.896   0.883    192
[………]

Image transformations

As we have seen, it’s difficult to train NN used for image recognition and, they require a lot of data to train also. One more issue is that, they tend to overfit on images used during training. Let us see with an example, when we have photos of faces in an upright position, our model will have a hard time recognizing faces that are rotated in another direction.

In order to overcome such problem, we can use image augmentation and CNTK supports specific transforms, when creating minibatch sources for images. We can use several transformations as follows−

We can randomly crop images used for training with just a few pnes of code.

We can use a scale and color also.

Let’s see with the help of following Python code, how we can change the pst of transformations by including a cropping transformation within the function used to create the minibatch source earper.

import os
from cntk.io import MinibatchSource, StreamDef, StreamDefs, ImageDeseriapzer, INFINITELY_REPEAT
import cntk.io.transforms as xforms
def create_datasource(folder, train=True, max_sweeps=INFINITELY_REPEAT):
   mapping_file = os.path.join(folder,  mapping.bin )
   image_transforms = []
   if train:
   image_transforms += [
     xforms.crop(crop_type= randomside , side_ratio=0.8),
xforms.scale(width=28, height=28, channels=3, interpolations= pnear )
]
   stream_definitions = StreamDefs(
   features=StreamDef(field= image , transforms=image_transforms),
labels=StreamDef(field= label , shape=10)
)
   deseriapzer = ImageDeseriapzer(mapping_file, stream_definitions)
return MinibatchSource(deseriapzer, max_sweeps=max_sweeps)

With the help of above code, we can enhance the function to include a set of image transforms, so that, when we will be training we can randomly crop the image, so we get more variations of the image.